Question about Bosch Nexxt Premium WFMC6400UC Front Load Washer

1 Answer

I have Bosch Nexxt Premium WFMC6400UC Front Load Washer. It noted a suds or pump blocked error. I was able to access the pump cleanout at the bottom of the washer and remove a small wire that was lodged. The drum of the washer will now not spin or move. The machine goes through cycles like its ok it pumps and drains water but the drum will not spin. I can move it manually.

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Bosch Master
  • 2,605 Answers

Hello and welcome to fixya.

I`d suggest removing the back panel and inspecting if the belt has perhaps come off.

**Unplug the unit from the wall first**

If so, put the belt around the motor pulley and start it around the drum/drive pulley. As you hold it in place spin the large pulley and it should go back on, careful not to pinch your fingers...ouch :(

Let me know what you find out or if you require further assistance.

If this indeed solves the problem please take a second to rate my solution accordingly.

Thank you for choosing`"fixya" and good luck.

macmarkus :)

Posted on Jun 18, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch Nexxt Washer Error Code E01


means that the computer is seeing the door as opened even though it may be closed, you can fix this by following this guide:

Bosch Front Load Washer Error E01

Dec 01, 2012 | Bosch Nexxt Premium WFMC6400UC Front Load...

1 Answer

Washer has stopped and error says suds or blocked pump


Hi, there is a round cover on the front left corner. Install a pick in the small hole and turn the cover. You will see a twist cap behind the cover. Unscrew the cap and remove what ever is blocking the pump from turning. Watch out because the water in the tub will drain out.

That should fix the problem....

Jun 19, 2011 | Bosch Nexxt Premium WFMC6400UC Front Load...

1 Answer

Water will not drain out of washer (bosch nexxt 6400). Will spin if on cold wash but not on spin. makes a clicking noise while trying to drain


The 03 error code is the drain. Disconnect the drain hoses and check for blockages. If no blockage "time" the drain interval. If it's more than 6 minutes it's the pump. Also make sure you're using the correct type of soap so the ball check valve on the bottom of the outer drum isn't getting fouled with excessive suds. Also disconnect the drain hose from your house plumbing and let it free flow on it's own. This will tell you if the block is in your plumbing, and not in the machine. Assuming that your filter is clean.

Pl rate me ‘very helpful’ for the free help!

Mar 14, 2010 | Bosch Nexxt Premium WFMC6400UC Front Load...

1 Answer

Washer won't drain - says there are suds in the pump or the pump is clogged


The filter needs to be cleaned.
This is located at the bottom front right of washer
Unscrew anti-clockwise to remove and clean.

Mar 09, 2010 | Bosch Nexxt Premium WFMC6400UC Front Load...

1 Answer

Bosch front load washer display says drainage blocked. What do i do?I already checked the exterior drainage hose


look for a front plate lower right corner / remove plate and inside is 3 in drain cleanout . ccw will remove and clean basket . cw to reinstall . should correct problem. mm

Dec 03, 2009 | Bosch Nexxt Premium WFMC6400UC Front Load...

1 Answer

Error E;04


Located front down on right hand side. Remove cover gain access to water pump.

Jan 31, 2009 | Bosch Nexxt Premium WFMC6400UC Front Load...

2 Answers

Washer will not spin


Carbon brushes in motor have worn down clean armture and replace brushes.

Nov 26, 2008 | Bosch Nexxt Premium WFMC6400UC Front Load...

2 Answers

Bosch Nexxt WFMC3200UC


Bosch Nexxt WFMC3200UC Water pouring out from beneath washer. This video will show you how to find that leak on any front loading washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

Mar 15, 2008 | Bosch Nexxt Premium WFMC6400UC Front Load...

2 Answers

MY LAUNDRY MACHINE


Check instruction book, it just prizes off. Regards Advisor

Aug 23, 2007 | Bosch Nexxt Premium WFMC6400UC Front Load...

Not finding what you are looking for?
Bosch Nexxt Premium WFMC6400UC Front Load Washer Logo

392 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

jimorris77

Level 3 Expert

411 Answers

Dw Wooten
Dw Wooten

Level 2 Expert

227 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...