How do i set up my dish network satalite antenna

The aerial antenna inside the tablet is broken.

No indication of make and model or age given, so not possible to advise other than;

If it is a cheap Android 'no name', buy another.
If it is a listed make like Samsung Galaxy take it to any good mall kiosk.
If it is an iPad, take it to the Apple Shop.

All questions need 'make model (what it is) as first 3 words.

If you have poor internet connection problem with your WiFi, try with the following steps,
1.)Reset the wireless router by using the power switch on it or by unplugging it and plugging it back in.
2.)Place the wireless router in an ideal location. The higher it is, the better, but don't put it near metal objects.
3.)Get as close as possible to the router with whatever device you're trying to connect.
4.)Keep the router and your connecting device away from other electronics. You should especially keep away from phones, fax machines and microwaves. etc.,
5.)Adjust the Wifi antenna if it has one.
6.)Change the router's channel, especially if other wireless routers are nearby.Following these steps would give you stable internet connection and also increased speed in connection. You can check your internet speed from ScanmySpeed.com before and after following these steps.

If you have Android 3.x, use this procedure:

1)Open Settings
2)Touch Wireless & networks on the left
3)Touch Wi-Fi settings
4)Find the network you wish to connect to and long press it (touch and hold).
5)Touch Modify Network
6)Touch the IP Settings drop down and change from DHCP to Static
7)Enter the settings for your network - if you are unsure what settings to use, contact your network administrator


If you are using Android 4.0, then use this procedure:

1)Open Settings
2)Under the Wireless & networks heading on the left, Touch Wi-Fi
3)Find the network you wish to connect to and long press it (touch and hold).
4)Touch Modify Network
5)Touch the Show Advanced Settings check box in the lower left corner of the dialogue box. If the Show Advanced Settings option is not displayed, you may need to go back a step and Touch Forget Network, and then, when you reset up the network, you will see the Show Advanced Settings option
6)Touch the IP Settings drop down and change from DHCP to Static
7)Enter the settings for your network - if you are unsure what settings to use, contact your network administrator

To ensure that you have got Static IP visit IP-Details.com to have an IP lookup.

Wi-Fi technology enables wireless Internet and network access through public and private hot spots.

These hot spots are widely located in homes, restaurants, bookstores, coffee shops and other businesses, so you can keep connected wherever you may travel.

To connect to Wi-Fi, you must have an enabled wireless adapter on your computer.

Most modern laptops and many desktops have this adapter built into the system, but many lack such capabilities.

However, a wireless adapter is easily installed via USB, which allows you to connect to available networks through Windows 7.

Enable your wireless adapter. Most laptops have a hot key labeled with a radio antenna.

Hold the "Fn" key and press this key to toggle wireless on or off.

Desktops likely have a physical antenna on the back of your computer that is typically always on. If you don't see such a hot key or antenna, you need to acquire a USB wireless adapter.

Attach the USB wireless adapter to an available USB port on your computer.

Windows 7 will automatically install the necessary drivers for most adapters.

If it does not, insert the CD that came with the USB wireless adapter into your drive and choose to install their drivers.

Restart your computer if you do not see a wireless icon in your Windows 7 notification area.

Click the wireless icon in the Windows 7 notification area and click the network name to which you want to connect.

If this is your home network, the correct network will likely be the one with the strongest signal.

Click "Connect" and enter the wireless security passphrase, if required.

Only secured networks will ask for a passphrase, but some public networks will require browser authentication instead.

Open your browser and navigate to any website.

If the hot spot requires browser authentication, your website request is redirected to an information page.

Follow the instructions on this page to get Wi-Fi.

This may entail clicking "Accept," entering a given password or entering a cell phone number.

After authentication, attempt your website again to verify accessibility.

Hope this helps

Sounds like the wireless card on board is faulty or the antenna

You need to add the wireless network in which you want to access. You can do this by following these steps on the tablet:
Press "Settings" button (looks like a filing cabinet on most devices -> then select "Settings" - > then "Wireless and Network" - > then "Wi-Fi Settings" -> then mark the box next to "Wi-Fi" (this will turn on the WiFi antenna -> you will then see the available wireless networks.

Do you see the networks on you tablet? Ask at the campground where the wifi antennas are and go close. Somewhere in the settings for wifi you should be able to activate wifi if it isnt and then select wifi connection. They might have a login.
Good Luck.
Sorry im not that good with Android.

You probably know this already, but... There is a small switch in the front edge panel, next to the head phone and mic plugs. This is a manual wireless cutoff. Make sure it's in the on position.
Flip it back and forth a few times ending in the on positon. There is also an orange led that should be lit (the one closest to the switch) when it's working.
If the led is lit, and still no connection, then you likely have have a problem with the antenna or the network module itself.

You could try downloading and reinstalling the software for the wireless module. Toshiba.com/support

The module is accessed from one of the panels in the bottom of the unit. The antenna is more difficult, mounted in back of the screen.

For Nimiq 91W- ExpressVu Standard based on Los Angeles coordinates are Longitude 91... 34 N Lat, 118.25 W Lon

For Nimq 82W-ExpressVu HDTV and international based on Los Angeles, Longitude is 82... 34 N Lat, 118.25 W Lon

http://www.kusat.com/install/calculator.php

Good day,
I might be missing something, but you are describing a converter box that converts digital signals from an antenna to analog.
The converter box will be set to channel 3, and you should set your tv's to channel 3 as well.
Using the remotes that came with the tv's go into setup and if available as an option, you will find an option to select cable/antenna or automatic. Select automatic or antenna and save. If there is a selector switch on the back of the tv's, set to 3.

Connect antenna cable into input, and use supplied cable to connect from the output of the converter to your tv.

plug in power supply for converter box, tune tv to channel 3 then follow instructions to setup converter box including channel scan.
When done, the converter remote will control everything. However, the tv volume control will work even though the converter remote will have volume as well. The tv remote as well is needed to shut off or turn on tv. These functions can on most tv's be performed on the set as well.

No codes are required. The converter remote will work on any tv.

If you want to use both tv's then you will need a splitter on the output of the converter to send the signal to both tv's. Only one channel can be viewed at a time.

Viewing separate Chanel's requires a second converter box and a splitter connected to the antenna cable for viewing separate channels.

More options are possible, but I hope this helps you get started.
The converter box takes place of the tv's tuner and in essence disables it.