Looking for body part orframe

I've never had much luck getting information like this for most joysticks, and have never gotten it for Penny+Giles stuff. You may have the best luck looking for a used replacement joystick on eBay or Craig's List.

Check your battery connections, make absolutely sure it is connected correctly.

Place a multimeter in the XLR plug (joystick). You should have around 26V reading if batteries are connected correctly.

Check the free wheel levers. place the chair in free wheel and move back and forth a couple of times. Place the chair back into drive, turn on controller and try to drive. ( This is not typically associated with a clicking sound but will ensure your brakes are not on)

If you are still hearing a clicking sound, it could be a problem with the brake or a motor. A qualified technician should really look at it for you.

If you obtained the Hoveround directly through Hoveround, please contact them for expert solutions. http://www.hoveround.com or 1-800-96-HOVER. They made the chair, they KNOW the chair best, and can provide the right answers!

Try this site ,it wil give you more or less the run down on the lights flashing.If that doesnt help I would call Hoveround.They have Trouble shooting over the phone.http://www.pgdt.com/scenter/diagnostics/diagvsi.html


Good luck

Hoveround doesn't publish the manual online. Go to their website and get the contact number to call and request a manual...usually at a fee...they ****. Next time, buy a Pride, Invacare, or whomever has the owners manuals online.

Problem solved.

Your best bet is someplace like ebay. If that doesn't work contact hoveround. If it is just the cover you could have a new seat cover put on.

Call 1-800-771-6565 extention 5000. You will need the serial number of the chair and then they will get you a manual.

No you will have to have proper working batteries.   

The battery charging connector, which may appear as the female connector of a stage-quality microphone, is underneith the Joystick control arm. An external charger should have been provided by the seller, so if you don;t have one, you'llhave to contact the chir manufacturer.