Whirlpool Duet GHW9150P Front Load Washer Logo
Posted on Jun 11, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

My whirlpool duet washer will not completely drain the water out of the soap dispenser. It is five years old

Answer This Question

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

  • Master 15,935 Answers
  • Posted on Sep 30, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

Joined: Dec 21, 2008
Answers
15935
Questions
19
Helped
5036493
Points
35540

You could have a clog in the housing underneath the dispenser where the water flows through a hose into the tub.
Pull the dispenser drawer completely out.
There is a tab that needs to be depressed to release the drawer and remove it.
Check the opening at the bottom of the housing just inside the dispenser housing opening to see if a small sock or garment is clogging this opening.
Reach down into this opening to see if an item is inside the hose.
This is the normal issue that will cause water to leak out of the dispenser housing.

Wash the dispenser drawer thoroughly with warm water. Make sure that you pull off the siphon covers and wash all siphon holes. This process is described in your owner's manual. Replace the dispenser drawer and try the washer again.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

The powder will not dispense. Water is getting in because the powder is wet and clumpy but is still left in the dispenser.
I suggest you remove the soap dispenser drawer and thoroughly clean it, ensuring that the outlet at the back of the drawer where the water and soap feed into the machine are completely clear of any soap buildup.

Before you replace the drawer, ensure that the water feed into the drawer (this is a pipe or tube above the drawer slot) is not clogged with soap.
Read full answer
Feb 07, 2011 • Whirlpool Duet GHW9150P Front Load Washer
2helpful
1answer

The soap dispenser does not completely empty and it leaves water in the dispenser when it is done.
open top cover of machine. there are hose connection dispenser remove hose and clean hole.
Read full answer
Nov 02, 2009 • Whirlpool Duet GHW9150P Front Load Washer
0helpful
1answer

My duet front loader is not draining. Water came pouring out of the soap and fabric softener dispenser. There was not a code displayed when this happened
make sure the drawer is closed all the way , and that you don't have a build up of soap in side where the dispensor drawer slides , this could keep the water from going into the washer.
Read full answer
Oct 26, 2009 • Whirlpool Duet GHW9150P Front Load Washer
0helpful
1answer

The water is over flowing from the soap dispencer. i pull the tray out and the water is slowley draning into the machine how can i unclog it
it is most likely soap or softner clogging the hoses.
remove dispenser drawer (pull out to max, on the top near the rear of the dispenser there will be a tab that will allow you to remove completely) clean out anything that you see with rag, old toothbrush etc. any way you can, then put some hot (almost boiling water in the despenser area. this should clear your issue.
Read full answer
Oct 09, 2009 • Whirlpool Duet GHW9150P Front Load Washer
0helpful
2answers

Whirpool Duet - Soap not getting into wash cycle
O.K. Is the water draining out properly? If the filter is blocked then your washing will be churning in dirty water as the machine will drain for a maximum time then rinse etc. in the used water.
Read full answer
May 23, 2009 • Whirlpool Duet GHW9150P Front Load Washer
0helpful
1answer

Water leaking from the soap dispenser during rinse and spin cycle
use liquid instead of powder and always use HE detergent
Read full answer
Apr 23, 2009 • Whirlpool Duet GHW9150P Front Load Washer
21helpful
2answers

Whirlpool Duet GHW9100L pours water out of the soap dispenser dra
probable cause is there is an article of clothing that is stuck between the outer and inner tubs, in the area where the dispenser water and detergent enter the machine. you can run your hand around the rubber boot and you might be able to remove the article, it will be in the upper left part of the machine. if nothing can be found than you have a plugged up dispenser hose.
Read full answer
Jan 29, 2009 • Whirlpool Duet GHW9150P Front Load Washer
3helpful
2answers

Water overflowing from dispenser, no error codes
check the holes of the dispenser, could be clogged with soap and liquid detergent. check the hose where the dispenser flows to the drum, it could be clogged also. open the door, trace the dispenser hose that is attached to the drum or to the big rubber gasket at the front. check and see if there is dirt accumulation or soap clogging the hole.

tnx 4 using fixya,

drcool
Read full answer
Oct 14, 2008 • Whirlpool Duet GHW9150P Front Load Washer
0helpful
1answer

Dishwasher soap remains in the soap dispenser following the complete cycle. I have had the washer for a year and a half. The first year, no soap remained in the dispenser. Now about 1/8th of the soap...
Try cleaning the soap dispenser with white vinegar so that it is free of all detergent, then try using about 1/4 less detergent than you have been to see if you still have any remaining in the dispenser. Also, make sure your drain filter is free of all sediment so that the system can pump the water out freely. Lastly, if you are still getting some soap remains, then try using a sanitary setting that uses the hottest water and see if the excess soap is properly dispensed. Your water temp may not be getting hot enough so this test should help identofy the solution. Hope this helps !
Read full answer
Aug 20, 2008 • Whirlpool Dishwashers
0helpful
1answer

Where's the soap going?
Clean the dispenser water hose ,stuck by liquid dried soup./ the hose going to washer was open during washing time so all soap loaded was gone /
During water refill if nothing water pass to soap dispenser the soap will remain intact / but in washing time all soap will directly washout dispose to drain hose without to clean clothes.
Read full answer
Jan 05, 2008 • Whirlpool Duet GHW9150P Front Load Washer
Not finding what you are looking for?

View Most Popular

Duet GHW9150P Front Load Washer

  • Washing Machines

Related Question

The powder will not dispense. Water is getting in because the powder is wet and clumpy but is still left in the dispenser.

  • Whirlpool Duet GHW9150P Front Load Washer

Related Topics

306 views

Ask a Question

Usually answered in minutes!

Popular Questions

Whirlpool Duet Sport Washer will not drain - F-21 error

Whirlpool Duet GHW9150P Front Load...

F 11 error code on Whirlpool Duet - Serial Communication Error ?

Whirlpool Duet GHW9150P Front Load...

Whirlpool Duet Washer-error code "sud"

Whirlpool Duet GHW9150P Front Load...

Whirlpool duet washer-error F06 and E02

Whirlpool Duet Steam WFW9750WR...

ERROR CODE (F24) ON A WHIRLPOOL FRONT LOAD WASHER

Whirlpool Duet GHW9150P Front Load...

Top Whirlpool Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...