Whirlpool Oven/Convection Oven Timer Problem

Fan is bad or blades are bent hitting frame

If its a self cleaning oven it might be in clean mode. It usally takes 4 hours to clean. If its been more than 4 hours, it might be an electronic issue. Try unplugging it for about 5 minutes and plugging it back in.

It sounds like the electronic timer/clock is in the automatic mode. It must be in the manual mode for the oven to work.

When you say board I assume you mean the electronic clock/timer. This timer directly affects the oven operation. Even if the internal oven fuse is blown or the thermal overload is tripped the electronic timer and oven light will always work. If the oven light works and the electronic timer/clock does not I'd say that the timer/clock is faulty.

what is your oven if is gas or electric, if is gas easy to preheat by using lower heating element, if electric? that your unit have convection? or not? coz some probelm of the oven is, 1 if the oven is no convection or your oven is single heating in upper element,if your oven have a timer and cut off in 15minute? dont use timer,use a manual timer by it your self,if you want to reach the degrees that you want check your oven if der a lower and upper heating element with convection function,that the one is the most easy way to reach the degree that you want to reach.

Hi,

Use the regular bake setting.... run the oven at 350.... the 14 lb. bird will take about 4-5 hours.....convection moves air and can tend to dry out the bird...

heatman101

turn power off at main box the back on retry st set clock . if it won;t set / replace it . it has gone bad .mm

We frequently see this symptom due to a failure in the electronic range control (ERC). We repair a lot of these.

- www.fixyourboard.com

Worked it out for myself - no solution needed now thank you.

Replace the electronic module.