On the joy stick all the lights flash but it doesn't work

hi, whats it flashing ? , its telling you whats wrong , just make a note of what lights are flashing etc
VSI Flash Codes

regards
Rob

gewizrepairs.co.uk

Hi call support ::::
1-800-800-8586.....cheers

Check at the link https://www.hoveround.com/help/frequently-asked-questions/service-and-support/flashing-lights-controller-chair-wont-move

http://www.scootaround.com/images/pdf/manuals/pridemobility/Pride%20Quantum%20600E%20Owner's%20Manual.pdf

Check the connections at the motors.

Hello,repeat that to a service person.They should be able to give you a price for the job.

That flash code is controller fault. You need to replace it.

The lights indicate you are in charge mode or inhibit. Check to make sure the charger isn't plugged in. If it isn't then the inhibit function of the chair is bad and will have to be repaired Hope this helped

Hi. If you count how many lights were flashing and let us know then I can look up that fault code and tell you what it is. Do you have the free-wheel levers in the correct place? Check the motor and battery connectors. How old is the machine, are the motors or brakes faulty. The machine will not operate if the charger is still connected. Good luck. Neil.

Your batteries are bad or not charged up is it only 1 red light flashing or is it all power lights flashing 1 red means not enough charge. all means internal problem with joy stick