Magnavox mptv68a Hi there I have a Magnavox MPTV68A television and I would like to know if you can use any other Magnavox remote on this tv. I have no remote at the moment and the child lock has been set on it and I know you need the remote to unlock this. Can someone please help me

This link will assist you with getting a remote that will work with this television.

http://www.replacementremotes.com/PHILIPS/Buy-996500015582-Remote-Control.html

TV has internal overheating problem

go to www.sears.com ...part dept and you shuld find what you want..have make and model ready.I hope I was of help

i dont know the code to set my remote for my television

remote- oneforall
television- magnavox

Try using a diferent rf cables.I would suggest that red,white and yellow colour coded RF cable is still the best.(yellow for Pictuer,White for sound and red also for sound(surround).
had similar problem than i cahnge the cables and found out that it worked with that cable...

thanx,
FIJI

Last year i had a phillips 100hz tv which had a similar problem.
There can be one of 2 major problems :A processor chip which controls the colour and the tube which could have failed or both.
This could be an expensive repair if the spares are available,(Usually imported from there singapore branch)
I would first check the warranty and then take it to the agents.

Try these codes to unlock the TV
0711 or 0000

I don't know the exact TV, but Magnavox usually have an item or two items in the menu system where the "Magnavox" and also the "blue screen of death" can be disabled. Look in your manual.
I'd suggest the reason it appears is temporary loss of signal from the antenna, set top box, cable system or whatever it is you receive your TV programming via. I don't have an answer as to why it occurs watching video, but turning off the logo and blue screen should help. If it still occurs, it's time for professional intervention!

Hello pea16 serrure enfants means lock infants or as we say child lock.

Hold the display button down for 10 seconds, which removes the lock.
If that does not work try: unplugging the TV for about five minutes and see if that clears it, If you need the owner's manual you can goto: http://www.magnavox.com/ then click on support center and enter your model number.

Then go to the language section and select english.

I hope this helps,
Thank you,
Shuttle83

i have a magnavax mptv68a, the red button is on but the screen is blank, it doesn't even appear to turn on. can you advise me on what to do