KX-T7230C HOW DO i CHANGE DISPLAY WINDOW TO SHOW DATE AND TIME

Go to options - display - date/time format. Change it to short

Depending on what system the phone is connected to, you can press "*" or TRANSFER to show the 3 display states.

Carl

press star

Your extension reads 102 because that is the extension #.
Press either the tranfer key or the " * " star key and your display will change to time and date or just the date.

Press the star button

To set date and time on your phone system you must first enter user programming mode.
Using a display phone with the receiver hung up.
Press PROGRAM
Dial ** 1234 (SYS PROG NO)
Dial 000 (DATE AND TIME)
Press SP-PHONE key once (display shows current date)
Normally this is correct if not dial the changes in with your keypad. Use the FWD\DND key to
move forward on the display and the CONF key to move backwards.
Press AUTO DIAL STORE (Confirmation tone)
Press SP-PHONE key once (display shows current time flashing on hour)
Dial new hour (Two digits) Use the FWD\DND key to move forward on the display and the
CONF key to move backwards. Dial in any changes and when your done:
Press AUTO DIAL STORE (Confirmation tone)
Press HOLD (SYS PROG NO)
Press PROGRAM
Your phone should be back to normal.

Hi Mary

Which system are you using?
If you are using panasonic kx td 1232 then just press the * key keeping the handset on hook.

If you are using a panasonic kx tda system then just press the transfer button keeping the handset onhook.

To change the date you will need to goin the program mode by pressing the Program button followed by *# 1234. then it will show on the display sys pgm no : enter 000 and press autodial or enter. Then you can change the date.

press Program, **, 1234, 000, (change date & time), store, lift handset

On mine I press the asterix to toggle display options

The display on the phone ... to change back and forth between the date and time, and the extension information, press the "star" (or asterisk) key while the phone is on-hook, this will toggle the display back and forth.

Hope this helps, David B.