I have an RCA universal remote and a Sanyo TV. I

Use the SKU number of the RCA remote to look for the code here. Click on "Find your Remote Codes Here" at the left side of the screen.

Hello Jessie,

Here is a link for you

http://www.universal-remote.net/rca.html

hope this helps you out. If so then please remember to leave a thumbs up.

Cheers Little Dish Fitter.

no you require the remote or a universal remote or sometimes a cable remote that has been programmed to work the volume on the tv set will have an input button .

Get your Sanyo TV codes and one by one program the into you RCA universal until you can turn the TV on and off. Find codes at Sanyo.com, the manual, Sat Manual, Vcr Manual etc.

If its the RCA Universal remote, the Sanyo codes are: 002,012

Here is a useful link that i found for you.
http://www.ehow.com/how_9191_program-rca-universal.html
I hope i have been helpful Regards

how program my control sanyo for tv curtis mathes

I have a Sanyo TV and a RCA remote (universal) I have misplaced the code, can you help me?

I programmed an rca universal remote by:
TURN ONTHE TV
HOLDING DOWN THE TV ANDTHEON/OFF BUTTON ATTHE SAME TIME.UNTILTHEON/OFF BUTTON STAYED ILLUMINATED.
PRESS THE PLAYBUTTON IT WILL BLINK,IF TV DOES NOT GO OFF PRESS PLAY EVERY 5 SECONDS UNTIL TV GOES OFF.
ONCE TV TURNS OFF HIT THE REVERSE BUTTON THE TV WILL COME BACK ON.
HIT THE STOP BUTTON TO SAVE THE CODE.
REPEAT THIS BUT HOLD THE OTHER DESIRED DEVICE INSTEAD OF THE TV.

HOPE IT WORKS

Igotthisinfo from google....then typed in rca universal remote...there was a sight for programming remote.