Need driver how to install do not have disc - HP PSC 2175 All-In-One InkJet Printer

just download the printer driver from hp
and either run file or point windows to the folder driver sits in . depends on driver .
http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-5600-e-All-in-One-Printer-series/6809225/model/6809226

These days not many disc drives need external drivers. First I would check in the device manager, usually accessible from the control panel and see if the disc drive is listed. If it is and there are no notifications it probably doesn't need any other install. If you select it and right click then select properties it will tell you if its working OK and which drivers are installed. If there is a problem select reinstall or update driver and it will search for one and install automatically. If it can't find one and there is still a problem simply use a search engine put in the name and model of the drive then free driver download, there will be instructions on the site.

Hello,
If your sound is not working after installing then it means your sound driver is not installed properly.
So you need to either re-install XP or download the drivers.
Anyways i will give sound card driver to be downloaded.If you re-install XP again then make sure that your speaker is ON !
Here is the download link below.After installing kindly restart.
http://xpdrivers.com/sound-audio/_1_23.cfm
I hope it helps.
Thanks

it is asking for the drivers that it needs to "talk" toyour drive. a driver is a small software program that makes a hrd ware device work. when you bout the drive there should have beena disc with drivers on it. perhaps the startup disc even. unplug the drive from the computer and install the drivers then re plug it in. it should work. if you do not have the drivers for it you can get them from www.maxtor.com/support
but most likely the disc you have has them on it. the trouble you have is that you MUST unplug the drive and install the drivers FIRST. othwise you will get an error asking for the drivers.
so just unplug it and put the disc in you drive and look for "install drivers" option when the cd starts up.

You need to install the sound driver.I am giving you following tips to install the driver.
Insert driver disc in cd rom and follow the instructions to install complete driver.You also need to enter the product key,product key will given you with the disc or you can get it in the form of notepad.

Hello,

If you want to install all the products that come with your os cd's, then yes, you will need to install the other disk. The disk should have somthing like "Disk 2" and Disk 3" written on it. If not, once you have installed windows you can install the rest in any order.

Good Luck
C2Solutions

Go into your device manager find the hardware you just installed. Select it and tell it to install new driver and when it looks for drivers select have disc, put it in and it will find the drivers it needs.
If you need more detail please let us know.
good luck, and please leave rating.

Download the sata drivers to a bootable disc.Then load xp disc and boot from it when entering it will ask for additional(sata)etc. drivers load disc with new sata drivers .put xp disc back in and tell it to install to disc.RICHARDM69

Go to www.lexmark.com and click on DRIVERS AND DOWNLOADS. Then use the DRIVER FINDER. In SEARCH BY MODEL, type in z60? and you can choose a driver from there.

Steve

Dear Sir:
Do u want operating system disc of drivers disc.

If you want operating system disc.
Please contact the manufacturer of the computer they will be able to send you the disc you need.
if you want drivers disc you can download the drivers for the support site of the computer manufacturer.

Regards

Mohammed.

Regards.

Mohammed.