I have acquired a leisure rangemaster 110 dual fuel cooker and everything but both the ovens work, the clock is flashing constant could this be a factor?

• Hello David,
  
  when the clock does not work, the (left hand) oven will not work too I suppose.
  Often when the clock does not work, it is only the timer that does not work. In that case, the timer can be bypassed. The oven still works then, but without the timer and the clock will also work as a clock.
  So no timer.
  
  When it is an older rangemaster, and the ignition does not work, then probably are some wires leaking. I that case the power for the spark does not come to the burner sparkplug.
  But when all plugs do not spark then there are 2 possibilities I think.
  
  1 the ignitor is gone
  2 the ignitor does not get power
  
  I hope this helps, I wish you a good weekend, Dik

Leisure Rangemaster 110 Electric Range Cooker How to bypass

Hi Stella,

i am sorry for you, but you can forget repairing the timer.
You can replace it of course.
You do not need the timer to operate the oven.
For that you need to bypass the timer. The clock will stay working normally.
Although the 55 is smaller then the 110, the working of the clock should be the same.
Net link will give you more information and I hope you will fin the solution there.
Kind regards and a good weekend, Dik

Leisure Rangemaster 110 Electric Range Cooker How to bypass

Electric rangemaster tripping electric - what size mcb? ' DIYnot ...

www.diynot.com > Forums > How to... > Electrics UK

Apr 6, 2013 - Cooker occasionally trips the 'Wylex B32 MCB' when almost everything is going. ... http://www.ebay.co.uk/itm/Rangemaster-Leisure-110-Electric-Cooker-/ ... Find the total load via the site below, a ceramic nit is 14kw shock:

Oven or cooker tripping electric, what to do next? - YouTube

? 3:11
https://www.youtube.com/watch?v=O42p_tWYgAU
Dec 21, 2011 - Uploaded by Richard Saupe
Hi Richard, i recently bought a all electric rangemaster cooker second ... I'm asking because our oven trips the breaker when we try to turn it on, ...

Frequently Asked Questions ' Rangemaster

www.rangemaster.co.uk/rangemaster-owners/faqs

For earlier specification110cm models, remove the storage drawer and the silver ...Ceramic and Induction models may be connected to a suitable 6mm cable ...

http://www.diydoctor.org.uk/forums/electrics-forum.html 2015-12 ...

www.diydoctor.org.uk/forums/electrics-forum-f182.xml

If auto is flashing, i would say the oven is waiting on a clock time to be set to determine when to start cooking and when to turn off. Try and reprogramme the oven to manual. Reset the clock time, It should work then.

What is the model number of the unit?

You cant convert an all gas cooker like this to LPG

http://www.rangemaster.co.uk/Siteimages/Site_311/Pdf/ProfessionalPlus110DFOct08.pdf
User manual.
When the clock is first connected, the display flashes ( 0.00) and (?) alternately. To set the time, turn and hold the Timer knob to the clock symbol (?) and at the same time turn the Adjusting knob left or right until the clock shows the time of day. Remember this is a 24-hour clock. Let go of the Timer knob and it will spring back to the vertical, oven manual setting.
It is on page 6 of manual

at the back of the timer/clock there are 4 wires live and neutral to power the timer/clock and 2 others they may be red or orange. safely connect these other 2 together and you are good to go. if you need a new clock email me [email protected]

phone rangemaster they can advise how to change the spark in egnition and supply bit. 08707 895 107

the part that you need is the oven ignitor, located nest to the oven burner. that part gets hot to open the gas to the burner, that will make the oven work again.