Changing the f stop on lumex 10 meg - Panasonic Lumix DMC-LZ2 Digital Camera

may be you should make a diagnostic and you can do it in a garage or you can do it by yourself if you want to do it by yourself you need some tools and you can find some good ones here: chinasinoy.com

In order to use filters with the DMC-FZ7, you will need the DMW-LA2 adapter. With the adapter, you may use 55mm filters.

You may download a copy of the manual from the Panasonic support site here.

Call your ISP provider.

If you need more help post back!
Thumbs and testimonial are welcome!

Get Quicktime. Open it. File/Export. Choose settings that work best for you. You can play around with it after a while but Medium Web will get you about 3 megs per minute and Web Large will get you about 10 megs per minute (which is probably not much better than the flip mp4 codec).

I HAVE A SONY CYBERSHOT 5 MEG PIX WITH A CARL ZEISS LENS AND I LOVE IT IT OUT PERFORMS THE 8 MEG CYBER SHOTS

If that is all it was designed for , you can do nothing to change it,unless the BIOS upgrade allows more. 

You can't change the megapicels of the camera, but you can change the resolution (quality) of the image it captures, and thus give you smaller files and use less space on your memory.

Refer to page 40 of the User guide which shows how to adjust the quality.
http://downloadcenter.samsung.com/content/UM/200810/20081006113527265_L200_English.pdf

It is in the Synthesizer it can be fixed but it is not a simple fix. Call 706 270 3829 they are Galaxy Experts.

Try to access the router's setup page and change the MTU settings. The default address for the Befsr41 is 192.168.1.1. Here are instructions:

1) Use a computer wired to the router.
2) Launch a browser and type in 192.168.1.1, leave the username blank and the password is admin or the password you have set when you first configured the router.
3) Click on the Advanced tab then click on the Filters tab. On the bottom part you have MTU.
4) Enable that option and set MTU to 1500, 1400, 1300 (for cable ISP connection) and 1492 (for DSL connection) and check if it will work.
4) If that does not work, you can try upgrading the firmware of your router.