Door Handle coming loose - Ovens

I recommend calling either the manufacturer or the place you bought it from. Quite likely need a new door.

Remove the door gasket, that should give you access to removing door plate. Door handle may need to be replaced.

Pull handle off door two screws inside the oven door remove handle reset face plate

Hi, Get me a model# and I can look this up for you.

Thanks
Vic

The door can be seperated by screw on the side of the door, Put lock washers to insure futer tightness.

I had the same problem. We took the door off completely & turned it upside down. There are screws on the bottom of the door, take them out, take off bottom trim piece that holds the outside glass panel in place, remove glass panel and you can access the door handle screws and clean the inside of the glass while you are at it.

Hi,
You may have to get some loctite brand paste in a tube for applying to the threads of the bolts that hold it on.
This will prevent the screws from loosening.
Another way would be to get some spring washers or star washers at your local hardware store such as menards.

I would try putting some locktite on the threads so It wont come losse anymore.