How to completly reprogram my laptop.

Because they do not care, trust me. I have been a volunteer expert on this website since 2008, know all too well about the staff.

Try using the Roboquad in another room away from any possible interference signals from computers, laptops, neighbours WIFI, etc. And out of strong sunlight to avoid Infra-Red saturation. Ensure batteries of robot were installed with power switch in OFF position. Try the DEMO button to see if it dances OK. Try pressing STOP button TWICE within 6 seconds to do a reset, see if that helps. Good Luck

A physical obstruction in the path of the robot's motion. Examples
include tape cartridges that are extending from the picker assembly or
from a storage location, as well as tape cartridges or debris that may
have collected on the floor of the library.
2. A large number of electrical hardware failures. Firmware or hardware
detects that motion control is not occurring properly (encoder issues,
motor driving circuits, motor winding issues, etc.)
3. A relatively small number of mechanical hardware failures that do not
result in the detection of a complete obstruction, but where motion
control generates robotics firmware error codes (contamination or damage
to encoder wheel, high friction, etc.).


Possible FRUs is Robot Assembly

You posted under E1600.
Maybe you have Ei600
Ei600 5-year warranty is heavy-duty version of Intermatic ST01C 1-year warranty

One thing to note about this timer, the programs remain in memory indefinitely until timer is reset.
You might only need to reprogram current time.

Open following link to identify timer, and download Ei600 manual, and read ez wiring and programming instructions:
http://waterheatertimer.org/ST01C-program.html

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

u have a back door trojan u need to either reprogram computer or take it to an expert,me i reprogram it make sure you have your disk's for the process.

If it is a newer laptop you should report it. The newer systems have a LOJAK style program in the bios that allows the owner to track its whereabouts regardless wether or not the system has been reprogramed. But as far as doing the programing goes you just need a retail version of windows (what ever distro you like) and change your boot settings in the bios to "boot from CD" or make cd rom your first boot device - it varies depending on the brand of bios and its version) then you stick your operating system in the cd rom drive and turn your system back on. when it asks to BOOT FROM CD: just hit enter and off you go. It will ask self explained questions during the install but Im sure you will be able to manage

go to hp website to download the sp38171 which is the HP Quick Launch Button driver.

recently i purchased a HP540 laptop, was having the same issue like u all, so please install taht sp38171 to fix the function keys issue.

please,i need the drivers for this model

u must install original sony windows by original recovery cd from ur laptop .
turn it on and push F10/F11 quickly then it goes to recovery from its hdd .

Just reformat it's nothing much you can do more...OS has been corrupted so it need just format!