Here is the solution that will reset the count and allow your fully
functional toner cartridge (the one the printer tells you is empty) to
continue to work.
Open the front cover.
Press options button.
Press
the start button.
Press + or up arrow button 10 times.
Press set
button.
You have to do this with a long pause or the system will
reset and you will have to start over.
Good luck.
This is awesome. I was given the info in solution #2 by the Brother company and when it didn't work, I was told I had to contact a Brother authorized service dept. who in turn wanted me to pay $42.50 just to look at it. They said they suspected that a sensor was out. I tried this procedure and it fixed it!!
Didn't work. still beeping. not printing. where is pause? Before set? After options? Where?
thanks a lot, succes 4 U
Every one, loves shopping. who doesn't love shopping? Sometime directly or indirectly people like it. For this purpose isn't it a big question "what is the fine sight"? If it is most popular shopping site whom good is that. It is very unfortunate when a person don't able to find the good one. Of course, this is not possible for everyone that he gives a lot of time searching for a good shopping site
I spend some time and found a superb site that you can take a look. Very easily you can find some best product with dependable document. I strongly bereaved that you must like this site.
write here.. You can take a look of this site-https://www.microtonersupplies.com.au/to...
I bereaved that after visiting my suggested site you find some good product from it.
×
You just need to override the software, there is a simple fix for it, just check the tutorial: Affordable Brother TN350 Toner Cartridge
This is from Brother's support page at http://www.brother-usa.com/FAQs/Solution.aspx?FAQID=200000006154&Sympt=Why+does+the+message+Toner+Life+End+continue+to+appear+on+the+LCD+after+I+replaced+the+toner+cartridge%3f&Model=23&ProductGroup=5&Keyword=toner&ProductID=DCP7020:
Description of Problem
100000005096
Why does the message "Toner Life End" continue to appear on the LCD
after I
replaced the toner cartridge?
Description of Solution
200000006154
Brother
strongly recommends that customers use only genuine Brother drum units
and/or
toner cartridges. Each Brother laser printer is designed to work at
pre-set
temperatures that are matched exactly to each of our individual toner
formulations. Each individual component is designed to work with the
other
to ensure quality and reliability. Using non-Brother supplies may affect
the
hardware performance, print quality and machine reliability. The Brother
limited
warranty does not apply to any problem that is caused by the use of
third party
drum units, toner cartridges or toner.
1.
Did you replace the toner cartridge with a NEW, out of the box, genuine
Brother
TN350 toner cartridge? If no, you will need to purchase and install a
new
Brother TN350 toner cartridge.
If
a toner cartridge from another machine was installed (even if there's
still
toner left in the used cartridge) or a TN Starter toner cartridge
(included with
the purchase of a machine) was installed, the message "Toner Life End"
would
continue to appear on the display. You will need to purchase and install
a new
Brother TN350 toner cartridge.
2. If
you installed a new TN350 toner in an attempt to resolve the Toner Life
End
message, verify the toner cartridge is installed correctly by following
the
steps listed below:
a.
Open the front cover.
b.
Lift the drum unit slightly and pull it out. Place the drum unit on a
drop cloth
or large piece of disposable paper to avoid spilling and scattering the
toner.
c.
Remove the toner cartridge from the drum by holding down the lock lever
(blue
tab) on the left side of the drum unit and lift the toner out.
NOTE: Handle the toner cartridge
carefully. If
toner scatters on your hands or clothes, immediately wash it off with
cold
water.
d.
Gently rock the toner cartridge from side to side five or six times to
distribute the toner evenly inside the cartridge.
e.
Place the toner cartridge into the drum (be sure it clicks into
place).
f.
Clean the primary corona wire inside the drum unit by gently sliding the
blue
tab on the top of the cartridge from right to left several times. Return
the
blue tab to the home position before reinstalling the drum unit
assembly.
g.
Reseat the drum unit into the machine.
h.
Close the front cover.
If
the problem continues and you installed a NEW, out of the box, genuine
Brother
TN350 toner cartridge, and your machine is within warranty, you can
locate a
Brother Authorized Service Center (ASC) in your area by clicking on the
link
below:
http://www.brother-usa.com/service/default.aspx or
contact Brother Customer Service by calling 1-877-Brother
(1-877-276-8437)
Monday through Friday, excluding holidays.
If
your machine is out of warranty, you can locate a Brother Authorized
Service
Center using the information listed above
SOURCE: MFC-7840w keeps saying "toner life end"
After I figured this out, it was quite easy to resolve. Remove the toner cartridge from the drum cartridge. Remove the black plastic cover on the left side of the toner cartridge (3 Phillips screws). There is a "flag", which is a small plastic tab on the outer side set to the right at about 2 o'clock. Turn the gears until you fully reset the tab going counterclockwise to the 10 o'clock position (fully to the left). Reinstall the small black cover and the three phillips screws. And the idea to install black electrical tape over the small clear plastic windows on both sides is also a good idea to prevent the early and false message that the cartridge is empty. Make sure you do not allow that tape to get into the gears.
SOURCE: Printer will acknowledge only 3 of 4 new ink cartridges - keeps saying change LC51M
doesn't LC51M refer to Magenta(red) not Cyan(blue). on my J435W the colors goes as follows: BK Y C M LC71 Series cartridges. Maybe you have them switched around? just a thought.
1,396 views
Usually answered in minutes!
Every one, loves shopping. who doesn't love shopping? Sometime directly or indirectly people like it. For this purpose isn't it a big question "what is the fine sight"? If it is most popular shopping site whom good is that. It is very unfortunate when a person don't able to find the good one. Of course, this is not possible for everyone that he gives a lot of time searching for a good shopping site
I spend some time and found a superb site that you can take a look. Very easily you can find some best product with dependable document. I strongly bereaved that you must like this site.
write here.. You can take a look of this site-https://www.microtonersupplies.com.au/to...
I bereaved that after visiting my suggested site you find some good product from it.
×