Vizio P2 42 in. HD-Ready Plasma Television Logo
Posted on May 22, 2010

Humming sound we just purchased our 42 in hdtv. when we turn it on there is a humming sound coming from it. Is this normal? it is very annoying.

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 2 Answers
  • Posted on May 29, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: May 29, 2010
Answers
2
Questions
0
Helped
1062
Points
4

Samsung states - A buzzing sound from your plasma TV is normal. It is caused by the electrical charges used to create the images on the screen. The buzzing, however, should not be so loud that you can hear it when the volume on the TV is set at normal levels.It is also important to determine the type of buzzing sound. A sound like a ground hum is completely normal. This buzzing can originate near the power cord connection or from the SMPS board position on the upper back of the TV. The buzz will be more audible as contrast increases on the screen, most notably when displaying an all white screen. If the buzzing sound is loud, you may have the Contrast set too high. Lower the contrast to reduce or eliminate the buzzing.You may also have loud buzzing if the rear of your Plasma TV is too close to a wall or other hard surface. Try moving your TV away from the wall until the buzzing is minimized. [1]
If the buzzing is at a higher frequency and resembles a crackling sound (like the sound of Velcro being pulled apart), and originates from the upper middle back of the TV, you likely have a failing SMPS board. Place a support call with Samsung to have the SMPS board replaced.FP-T5084 Have a known buzzing problem with a very simple fix.If the buzzing is coming from the left or right sides of the rear and the volume can be changed by pressing lightly on those locations, you are probably hearing the vibration of the grounding springs on the back panel. Call Samsung (or whoever) and have a technician confirm the problem. The easiest fix is to insulate the offending spring by applying some felt tape.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My Lamp won't ignite. At first my TV was just turning off on its own so I bought a new lamp. Now when I turn it on it just hums in the back and the light doesn't even come on, then it turns...

If the hum came in front of the lamp housing, the fault came from the faulty color wheel. Replace this part and your unit will back to normal operation again.
0helpful
2answers

Newly installed Leviton dimmer switch humming at the switch

Unfortunately, the hum is normal for operation of that type of dimmer at low levels.  Sometimes the lamp filaments will also "sing" a high pitched sound.
0helpful
1answer

Tv hums when hdmi is connected via dvd player

how do you have the audio hooked up for it if you are using componet cable (red,white) for sound they could be causing the humming you can either switch audio cables or use some other form of cable for sound
2helpful
1answer

Humming from back of tv

sounds like your powerboard, you can try a cheap fix by putting a small fan behind the tv on low and see if that helps. Also I would not settle for this and call in the warranty and get it fixed while you can.
0helpful
1answer

Akai 32" flat pannel making a humming sound?

replace the a/v RCA cables to start with and then if you still have a problem, you have loose connecitions on the a/v board

good luck
[email protected]
0helpful
2answers

Vizio 42'' HDTV flatscreen

The TV usually hums when the backlight setting is too low. So turning it up should get rid of the problem. To do this please follow these instructions:

1. Turn the TV on.
2. Press the Menu button on the remote, located right below the channel changing button.
3. Press the down direction button, located at the middle of the remote. Press that button until the backlight is highlighted.
4. Press the right direction button until the backlight is at 100.
5. Press the OK button and then the Exit button until you get back to your picture.
0helpful
2answers
1helpful
1answer

New 42LG30 - 42

This is probably a defect in the backlight inverter circuit. The transformer may have a loose winding or something in there is not cycling off or on properly. If you can still collect on the warranty, do so.
0helpful
1answer

LG LC55 humming/buzzing

Have you tried adjusting the contrast? , have a similar problem with a 42'' lcd and it appears to be related to the contrast setting .If is set my contrast below 90% the buzzing sound stops.
This buzzing sound seems to be a common problem with LG TV's
1helpful
2answers

Humming noice

I have seen similar problems (features?) with Syntax LCD TVs. One thing to try is to make sure that the backlight brightness is set to its highest setting. On my Syntax, when this is set to a darker setting, it produces annoying hum through the speakers. Mine also is smart about turning *off* the audio amplifier when set to zero (or mute), which sounds like the behavior you are describing.
Not finding what you are looking for?

853 views

Ask a Question

Usually answered in minutes!

Top Vizio Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you a Vizio Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...