We are needing a manule for a projector model number is xg-p25xconference series. It is a sharp. Can you please tell me how we can get this manule?

Service manuals for sale, but I didn't see an owner's manual.

https://manualsparadise.com/ShowProductsForModel.do?model=M87371158

https://www.artfire.com/ext/shop/product_view/1SewingPro/6798214/sharp_xg-e650ub_secam_pal_ntsc_projector_repair_service_manual_origina/media/music

SHARP XG E650UB SECAM PAL NTSC PROJECTOR Repair Service Manual Origina

I've searched all over...heh, I've got TONS of Sharp service manuals but *not* yours...I did find, however, the xg-e650 manuals on manualsparadise.com. Sharp units, a lot of times, are very similar in architecture, functions, parts, etc. For example, practically any Sharp remote will work on your projector...BTW, the lamp you need is a BQC-XGE850U/1 and sells for $292-389 dollars.http://reviews.cnet.com/peripheral-accessories/sharp-projector-lamp/4505-8309_7-31382143.html?tag=mncol;lst

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited

it only takes up to a 640x480 resolution. it is a very antiquated projector.

Absolutely, they are designed to do so. You will need a svideo cable for video if your laptop doesn't have a parallel port for external monitor. Most projectors have svideo and parallel ports to use them as monitors. If using the external monitor option you select the alt/enter buttons to display on projector.

This would seem to be heat-related as these lamps get hot rather quickly. The first quick and dirty solution - try cleaning the filter which is under a panel on the bottom of the projector. Another fix - be sure the projector is plugged into an image source; i.e. computer or DVD player. Sometimes these units will go into standby mode without a signal. More difficult fix - be sure the fan is runningn. When it shuts down, the fan should keep running until the lamp cools, then it will shut down. If the fan isn't working the temperature build-up with shut the projector off. Replacing the fan may be a job for a tech.

either the lamp hours are close to or exceeding 1400 hrs and the lamp needs replacing, or the ballast is starting to fail. with the projector on, check the lamphours in the menu. after you replace the lamp (if it needs it), reset the lamp timer by holding down the down arrow, right arrow, and enter buttons, then press power.

I think you need remote for above said process.
Get original Sharp remote for XG-P10XU from Sharp Accessories.

Hello,

The remote and lens cap replacements are listed below.

Sharp XG-P10XU Remote Replacement

Sharp XG-P10XU Lens Cap Replacement

the model # you have given is for the bulb, not the projector......