Embroidery downloads baby lock ellure plus

Question edited for clarity.
Question moved to model category.

For some reason your model has vanished from the support pages!

https://babylock.com/machine-support-and-updates

Check all the plugs, and there might be a small glass fuse on the control board, but getting to it might be an issue.

https://babylock.com/machine-support-and-updates

..

Can you elaboate more on the issue

here is babylock number call them and see what they say
Consumer Help Line:
1-800-313-4110

I had the same problem and after buying a new card, found out that you get that message if the pattern you are trying to transfer is too big. reduce the size of the pattern and see if that works

Source: Linda's 15.000 Embroidery Design

Looking at the babylock.com website the Ellure Plus has more stitches although they are both machine embroidery machines. The Ellure Plus has a larger embroidery field than the Sofia though so this may well clinch it, 4" x 4" versus 5" x 7", I know I would go for the larger embroidery field so I didn't need to reset the hoop.

I guess though it comes down to price and will you use all the extra features of the Ellure Plus. If you are mainly doing clothing and home dec then you really don't need the embroidery features at all, its a personal preference though.

Have you been in for a demonstration and used both machines yourself? Sometimes the little things will crystilise the decision for you. Look at ease of threading up, lighting in the sewing area, size of the free arm and how easy it is to program and set up the embroidery functions. Then decide if the extra cost is worth it, sometimes its better to spend more now and not outgrow the machine's functions, but you know what your sewing needs are so its something you have to weigh up.

Babylock only reads PES.

Hi Lisa, I have the same machine. When I had that problem I was told that the design I was trying to do was to large for the machine. Basically it needs to be about a 5" x 7" design. When I put a smaller design in the machine was able to read it. Hope this helps! I'm still learning too.

I have definitely had this problem It just means that your orientation of the embroidery hoop is not correct when you load in the design.  I learned this through so much grief.  I knew the design was not too big for the card becasue it tells you the size when you do the design.  I did go buy a new card!   And the same thing happened.  Write back if you a step by step instruction. 

You have to have an Amazing Box or similar device and a blank memory card. You hook the Amazing Box up to your computer, put the memory card in it, and transfer the designs onto the card that way. Then you use the card in your machine like any other embroidery card.

Not if you just want to get the patterns off the internet, etc., you cannot, or at least with my older version, make your own designs. You need to download the program to your computer. Its pretty simple if you get on the internet and download the designs put your palette on your computer, go to the designs, with a blank card, and load the patterns. Hope this makes sense.