My remote held hand unit is stuck saying Handheld 1.38 waiting

are the batteries in the hand held new. Are you stand within 20ft of door opener. You may have to re-sycn the codes with the handheld.
refer to owners manual.

Whether you have a thru the window model or a potable AC, the same controls that are on the remote are on the face of the unit. To operate it without the remote, turn the unit OFF and unplug it. Wait 5 minutes, then plug it back in. Wait 3 minutes & turn the unit ON using the controls on the front of the unit.. The controls will have reverted back to the original factory settings and you can now use the front control panel to operate & set the controls as you like.

If you want to purchase a new hand held remote, contact Haier Product Support 1-877-337-3639.

Hope this helped you and thanks for choosing FixYa.

Taking apart the hand held remote won't serve any real purpose as none of the parts inside are replaceable. Since you have 3 different units, with 3 different hand held remote. I'm wondering, if perhaps, you're using the wrong remote on that one unit. As each one has a different remote code.
In addition, I have learned from experience, that if the display screen on the hand held works, the problem is not in the hand held. Now, that's not to say, Operator Error can't play a role in it. But, most times, it's the receiver in the unit,that may be causing the problem. Or the hand held is to far away or something is blocking the signal in between.

Almost every appliance we sell, has a radio frequency remote control. The most problems we incur is with weak or dead batteries or operator error. The problem with batteries is that you don't now how long they sat in a warehouse, before making to a retail outlet and then how long they sat on the shelves there, before they were sold. They may have enough power to activate the handheld remote, but not enough to transmit a strong signal. So, check the strength of the new batteries you installed.

Hope this helps and thanks for choosing FixYa.

Just to clarify something, you say that your hand-held VHF can receive a clear transmission from the Uniden, now which of the radios are buzzing, the Uniden or the HH?. If it's the hand-held buzzing try transmitting on the low watt on the Uniden, get some distance from the radio, because if the hand-held are to close to the on the Uniden on high watt you will get a buzzing, the signal are overpowering the receiver of the hand-held, try getting the minimum of 30 feet away. Good luck.

Most problems with what you have stated have to do with bad contacts between the hand held unit and the battery charger. With the charger unplugged, make sure the contacts on both the charger and hand held unit are clean and not bent. Check to see what the "Light Indicator" should be when charging and reinsert the unit into the charger. If the light does not show what it is supposed to show, move the hand held unit around a bit to see if you can make the connection better.
If this does not do the job, depending on the age of the unit, might be time to replace the battery.

try a new battery, Clean battery terminals. make sure no stuck keys.

The main unit is not receiving the signal from the remote,
It can be a couple of things...

More than likely you have two remote handhelds. You may be using the wrong handheld to choose the options. Try the 2nd handheld.

Check to make sure the batteries are charged and handheld is ON

Make sure the receiver is in plain sight and not blocked

It is possible that it's just in the handle where the diverter is located. It just may be stuck closed and will not open when the button is pushed. You may want to contact the manufacturer for trouble shooting info and the possible cause. They will be able to help you determine what the model number is by your description of the faucet and handheld unit. Where we do not have access to that information.

do you want to completely delete all the data on your palm zire if so try a hard reset (deletes everything!)

To do a hard reset:

Press and hold the power button on the front panel of the handheld.
1.
While holding the power button, use the tip of an unfolded paper clip (or
2.
similar object without a sharp tip) to gently press and release the reset button.
Wait for the Palm PoweredTM logo to appear; then release the power button.
3.
When a message appears on the handheld screen, warning that you are about
4.
to erase all the data stored on your handheld, press any other button to perform a soft reset.

You will need to do a hard reset...this will wipe all the data on your unit, setting it back to factory specs...be sure this is what you want to do...

1...While holding the power button, use the tip of the stylus (or a similar object
without a sharp tip) to gently press and release the reset button inside the hole
on the back of your handheld.
2... Wait for the Palm Powered™ logo to appear, and then release the power button.
3... When you see the message that warns you about erasing all of the info on your
handheld, do one of the following:

• Press Up on the 5-way navigator to finish the reset and show the touchscreen.
• Press any other button to do a soft reset.