Plasmavision P42HHA10 42 in. Television: how do i get the external speakers to work ?...

For anything you plug in or just certain things? Before the sound stopped, did you change the sound output to something different? Do you have external speakers plugged in?

If the built-in speakers on the tv are not working, plug the television into a set of external speakers, select the output in the menu accordingly and test them. If they work, might be the speakers are blown or the menu configuration is wrong.

Always check the simplest things first, then work your way up to the harder/more expensive issues.

Rule out speakers, speaker board, connectors, external speakers, components attached to television, etc.

check to see if the Mute is on..

you may need to call in a technician , in the box itself is a small amp that powers the speakers. This seems to have gone bad in yours and needs replacing.

simply look at the speakers and you will see it connected to a small circuit board , that's the amp circuit.

It sounds that the main digital processor board [audio processing section] has the fault. If so, it have to be replaced. Visit the site named 'Electro-help' for more details. Click this link.

View it in 'Flip card' option, which can be selected from the drop down box menu by the [Sidebar] tag, at the top left corner of the display window. It will make search easy. Some times, the ads attached with each posts, both at the right and bottom, might help you to find the availability of spare parts. There are more than 850 posts to different brand TVs now.

Picture but not sound on my Fujitsu Plasmavision. TV used to be hooked into a control 4 system that handled sound but now no system is attached. Help! Tried adjusting the sound settings for a while last night to no avail.

There are many reasons which can do your plasmavision to not start. First of all you must verify if power light is on. Than, if the answer is affirmative, you must push a channel button. If the answer is negative, you should check the socket and power cord.

no reset button in plasma tv email me what you tv is doing and i can probally help you fix it [email protected]

Have you got component cables specially for the wii? if so, then the screen should work fine.

As for audio. You'll need to use separate RCA's Red and white into the audio input if your using external speakers, if your using a surround sound amp then put them into the input there.

http://www.plasmavision.com/Plasma_PDF/OMP50XHA(42VHHA)Home.pdf this is the users manual for your componant under usage refer to connecting external equipment to display thanks for stopping bye at fixya!

you need to plug the speakers into the back for sound.