How do set delay timer on powershot s40? - Canon PowerShot A75 Digital Camera

Press the FUNC/SET button. Use up/down to select Drive Mode (the rectangle, third item from the top). Use left/right to select the desired delay and press FUNC/SET. Start the self-timer by pressing the shutter release button.

Hi.

1. On the outside of the cameraPress the 'function set' button marked .

2. Use the 'up'/'down' buttons to select 'Drive Mode' in the display.

3. Use 'left' / 'right' buttons to change the self-timer mode.

4. Choose the timer delay or select , after which pressing the 'Disp.' button will allow you to set the delay and number of shots.

5. Press the 'function set' button again to start the timer.

Hope this helps!

Press the FUNC/SET button. Use up/down to select Drive Mode (the rectangle, third item from the top). Use left/right to select the desired delay and press FUNC/SET. Start the self-timer by pressing the shutter release button.

Press the FUNC/SET button. Use up/down to select Drive Mode (the rectangle, third item from the top). Use left/right to select the desired delay and press FUNC/SET. Start the timer by pressing the shutter release button.

Press the FUNC/SET button. Use up/down to select Drive Mode (the rectangle, third item from the top). Use left/right to select the desired delay and press FUNC/SET. Start the timer by pressing the shutter release button.

Press the FUNC/SET button. Use up/down to select Drive Mode (the rectangle, third item from the top). Use left/right to select the desired delay and press FUNC/SET. Press the shutter release button to start the timer.

From the menu, select Drive Mode (third item from the top) then one of the self-timer options. Start the self-timer by pressing the shutter release button.

Once you've set the self-timer, start it by pressing the shutter release button as usual.

you can choose 2 or 10 seconds delay

You can download the manuals for the PowerShot SD600 here.

To use the self timer feature, you need to set it up in the menu first.

1. Press the Menu button. If not in the shooting menu (silhouette of a camera), use the left or right arrow to get there.
2. Use the down arrow to select Self Timer.
3. Use the right arrow to select the clockface with a 2 or a 10 (2 second or 10 second delay).
4. Press the Func./Set button.
5. Press the Menu button to exit.

Once set up, you can activate it by pressing on the down arrow. You should see an icon change from a rectangle to a clockface at the top center of the LCD when the self timer mode is selected. Press the down button again to cancel the self timer mode.