PRINTING LINES Hello,when installing the software ,it failed because of a error, at that time I printed a calibration sheet & there was no horizontal lines. I downloaded the software from kodak & install was ok, now any size photo that I print, it looks like lined note book paper , the horizontal lines print in scale with the size of the photo .   The lines color is, like pencil, gray

This is not calibration issue. It could be due to corrupted Drivers. Uninstall and reinstall the printer software/drivers and it should work fine.

• Most of the leading software companies and mega industries are located in south phase of the city; hence many property investors and buyers are looking forBangalore South Residential Sites to invest, find the on-going residential Projects are constructing by the reputed developers our country and proving them at very reasonable price compare to current market value in NBR Green valley phase 2
  

Article Source : Bangalore South Residential Sites

Black printer ink in HP Printer may fail to be recognized by the printer. Most times an error message will be sent indicating that something is wrong with the black print cartridge. Sometimes the printer may accept to print with the black ink, but the printouts may have horizontal lines and very illegible letters. In such a case a manual cleaning of the print head should be carried out. In doing the manual cleaning, one should spray Windex heavily on paper towel and wipe off the surface of the print head.

http://en.kioskea.net/forum/affich-40171-printer-not-printing-black

hello, machine will need to finish calibration so it will not come back, so if machine failes it could be that the color cartridge is not printing, because this machine uses yellow to calibrate with.

Hi,
Throw away your HP disk and delete all HP software installed on your machine. It's quite rubbish.
Go to system preferences, and printers. Remove your HP printer (by selecting it and clicking on the '-' Then click on the '+' and let OSX find your printer and automatically load the driver. Now it will work.

I had the same issue... and found this to finally work after reviewing many sites.

System Setup - Print Quality - Adjust Alignment

I have a brother MFC 3240C. My Black ink stopped printing(initially printed horizontal faded lines and gradually got worse), the other colors were printing fine. I tried cleaning numerous time( 50 -100 times over 1-2 weeks ). Still no improvement. The way I print now is:
1. I go to Printer Properties
2. Change Media type from "Plain Paper" to "Inkjet Paper".
3. Change Quality to "Photo".

This takes a long time to print 1-2 minutes per page. However, this works for me since this is my Home printer and use it for printing only few pages here are there.

Good Luck
RK

Push menu on your printer, then fin maintainance. Then go to clean printer and push the green button. It will clean the cartridges for you and that should help. 

hmm..no blue, eh? that means that one of your print head cartidge lines is clogged. Sounds like time for a new cartridge tray, which you can access through www.kodak.com

Hello, you can print a calibration sheet from the front panel of the printer. Hit menu on the panel of the printer and scroll down to calibration printer and hit ok. Then hit ok on print calibration page and it should proceed to print a calibration page. After it is done printing, it will tell you to scan the calibration sheet.