Cutting off part of the picture

Dear the print preview shows you what will print actually, so you can check what will happen with you after printing at print preview.
to solve this problem check page setup: orientation,margin

you can maintenance ................. cleaning or deep claening ......click
it is in page set up ................. main........ preferences...

you might confirued wrong paper setting on print preview of scan document or try to change the size of the paper to A4 or letter

Get support for your ESP-5250 here:

http://support.en.kodak.com/app/answers/detail/a_id/19230/kw/ESP%205250/selected/true

Good luck.

Hi,

To print the background in your document, do the following:

1) Open the word document and go to File->Print.
2) When the print window comes up, click the option button at the bottom.
3) Then,tick the Background colors and images as shown in the attach picture.
4) Click OK.Then Click OK again to Print.

Hi,

To print the background in your document, do the following:

1) Open the word document and go to File->Print.
2) When the print window comes up, click the option button at the bottom.
3) Then,tick the Background colors and images as shown in the attach picture.
4) Click OK.Then Click OK again to Print.

There is nothing wrong with the Printer. The problem is the picture settings that are being used in the graphic software. You have not specified which Graphics or photo software you are using. Therefore I will generally tell you that you have to adjust the size and the dimensions of the photo you are printing. Make the photo small enough that it fits your page. Some graphics software also allow you to crop the photo (which means you zoom on a certain important part of the photo and bite it off and that part is sent for a print to printer). This whole game is in the software. Another important tip is that whatever photo or graphics software you use to print photos, never forget to preview your photo before you send it for printing. The Preview shows you how the overall image will look like after printing.

I print with the R1800 as well as the 24" 7880 in my studio. Whenever the "preview" shows less than the whole image I intend to print it is generally either the orientation (portrait/landscpe) is set incorrectly or the Paper size selected is incorrect for the size of the print.

Hope this helps

nickerjo

leaningpalmstudio.com

those are your cutting lines. should be able to select 1 print or 4 at that size

try the scaling function during print or page set up