I need the wiring diagram for A silver Eagle mike to a Ranger 2950 DX

The cable to mic / radio base has been replaced and is not stock. The factory diagram is d104-silver-eagle-wiring-diagram-3.jpg (1275×2100) (schematron.org)

If that is the only difference then anywhere the wiring diagram shows blue to the mic connection, use the white wire.

The best info I can find iis
radio mic
pin5 blue mic ground
pin6 red ptt
pin7 screen
pin 8 white mic

Astaic 36L. You never want to run a power Mike with a good radio with Mic Gain. Road King is great to. It is very hard to find the honey spot with a power Mike when you have Mike gain on radio.I think it is pretty hard to beat the 36L. I use one one my Connex 4600 Turbo and Galaxy 95T2, They both performe great. Connex is a little better a DX ing though

i have a gold eagle mark 4 i like two put a 776 mike back on it but i do not know the w coed .thank you .

blue

Stock
1- Shield (Ground)
2- Yellow (Audio)
3- Red (Transmit)
4- White (Receive)

Cobra
Stock
1- Audio
2- Transmit
3- N/C
4- Shield
5- Receive

Hello,
You can find the schematic here http://www.bellscb.com/products/microphones/Superstar/Superstar_Silver_Salute.htm
It should be the same as a D104. Hope this helps.

PIN #1 is common & shield(black&braided) 2 audio(white) 3 tx(red) 4rx(blue) if you knew what it was hooked to before it would be helpful.

This has worked for me in the past

Pin 1: Shield and Blue (Mic shield and PTT ground)
Pin 2: White (Mic Audio)
Pin 3: Red (PTT)
Pin 4: No Connection or Mic Return

Note: The Yellow and Black wires are not used.

I hope this helps,

Thank you,

Shuttle83

No offense but what the he!! is a blue light solution???? I've been doing radio repair for over 10 years and thats a new one on me,, A little more info would be helpful. Thanks Mechanic