How to change the time on cd reciever - Alpine CDM-9821 CD Player

You said "...on reciever cd out in the audio box..." but it should the reciever IN that you connect to. Also is the BlueRay player capable of playing CD's ? When you press play on the sony remote, do the seconds start counting on the screen ? (ie: is it playing, but no sound is coming out?)

The webpage http://www.dimango.com/dc-cd-quality-doorbells.htm

shows:

Wireless Doorbell CD Quality Door Chime Model RC4300

No longer do you need a wired door chime or traditional doorbell with brass tubing to get amazing, rich sound. Our Battery Operated Door Chime from Dimango has CD quality sound while remaining completely wireless...

• Plays three selectable sounds
  
  
  
  
  
  1. Ding Dong
  
  
  
  2. Dong
  
  
  
  3. Westminster Chime Click To Hear Sound!
  
  
  
  



• Set sound conveniently at button

It seems that there is a button on the receiver/speaker. Try press once and see if the sound changes.

To hook up your ipod to an a/v reciever you need a stereo mini to male rca cable. You plug the mini side into you ipods head phone jack, and the male rca's left and right(usually red and white colored plugs) to an auxilary input on the a/v reciever.-Example, tape, aux, sa/cd.
Change the input on the reciever to correspond with where you connected the ipod
Ensure the ipod is powered on and playing with the volume turned up.

One thing to verify is that the Ai-Net switch at the bottom of the radio is set to Norm and not the EQ position. And also gray Ai-Net connectors are for audio input and the black Ai-Net connectors are for audio output. It sounds like you have everything connected correctly and at least the Sirius is coming up. And I assume that the CD changer works when connected directly to the reciever so you know that it is working. I would suspect that there might be a problem with the Sirius reciever not allowing the communication signal to connect to the Alpine deck and in that case you would need to get a new reciever. You could check the Alpine radio settings and see if there is something that needs to be changed in order to allow the CD changer to work. If you disconnected the battery connection to the radio then it might have reset the settings to factory default. Otherwise it sounds to me like the problem is with the Sirius reciever.

wire the red and yellow wires together and tape(electrical) and turn the entire unit off by the off switch on your reciever (you will have to reset the unit for the final time- fader /bass/treble /balance/) what you have done is by passed the key switch( also look under the reciever for a "switched or unswitched button or toggle...



peace

If you are not set up to recieve automatic updates from microsoft you should change your settings to download these automatically and keep these up to date. To do this go to the start button, go to control panel, and then to security center. Click on automatic updates and follow the prompts.To get all of the latest updates go to the start button, go to all programs, point to and left click on windows update. This will start the process of updating your system. After some updates your system will need to be restarted,some do not require a restart. You have to repeat the windows update process a few times in order to recieve all of the latest updates.

look for pre out on your gemini hook up phono cables to these then to any input on your reciever,eg cd, switch reciever to cd turn up and away you go

how do i set the time on my cde7826p reciever

When it's powered up and DVD is selected push the demo button (possibly multiple times)and it should show you analog (most likely) then turn the dial that is around the demo button the change to coaxial then optical. These selections are only available for DVD, CD, and SAT.

u need a new flex cable