I am trying to pair my Samsung gravity phone to my car bluetooth device. It doesn't seem to recognize the device when it searches. It is supposed to prompt me when a device is found?

Pairing Bluetooth Devices
Posters often ask "How do I pair my Bluetooth ???" Insert whatever device you have at the question marks.

Generally, you need to read the instructions for the camera, headset, speakers or whatever the Bluetooth device is.

Roughly speaking though.

Settings - Bluetooth - Search, on the Android, iPhone, Windows phone whatever. (Infinix Phone)

With camera, speaker, headphones or whatever the Bluetooth device is, you have to press a button on that device to send out the signal. (Samsung Gear 3) On my Bowers and Wilkins T6 Speakers, there is a button on the top with the Bluetooth symbol on it. This is the part people usually don't do and ask for advice, thinking it will do this automatically.

When the Android device recognises it, click Pair, and if it asks for a code, the Default is '0000', (four zeros, no quotes).
Posted by ADMIN... on Nov 19, 2016

Videos on how to Pair the Gear3 Watch here

https://www.google.com/search?q=samsung+gear+3+watch+pairing+with+phone

..

1.first on samsung bluetooth device
2.press& hold call answer button in bluetooth device now light is on ,not blinking
3.and then search your bluetooth device by your phone and pair.

Follow these steps to pair your iOS device:

1. Turn Bluetooth on (from the Bluetooth menu on your iOS device)
2. Put your Jawbone device into pairing mode (click the link below to access instructions for your device)
   • ICON/ICON HD
   • ERA
   • JAMBOX
   • BIG JAMBOX
3. Wait for your iOS device to detect your Jawbone
4. Tap the Jawbone device name in the Bluetooth menu to connect

1. To begin, access your iOS device's Bluetooth menu:

• From the Home screen, tap Settings
  • Tap General (for iOS 5 or older)
  • Or tap Bluetooth (for iOS 6)

Have you put your BH-503 also in pairing modus?

If the BH-503 isn't in pairing modus no phone can find it!

Good Luck.

Pairing is a two part activity. On the device you are trying to pair with, you will need to set it to search for a bluetooth device to pair with. On that device, it should give you an activation code.
For example, when pairing with my car, I go into the menu, phone, and "pair". It tells me the activation code is 0000 (pretty common one, so you may want to try it). I put this in, and the phone pairs with the car.

1. turn on bluetooth on the samsung gravity which is in settings.
2. turn on whatever bluetoioth u have....follow instructions
3. pair them....let ur phone search for it
4. enter 0000
5 enjoy!

Try the same thing, but manually hold the boom arm in the fully open position. Seems like these units may have a faulty switch that fails to recognize when the boom arm is open or closed.

Well, it sounds to me like you know how to get the headset in pairing mode, have you tried turning off your old e900 and then pairing?

This guide was taken from here.

In standby mode, press Menu. Highlight Applications and click Select.
Highlight Bluetooth and click Select, or just press 4.
Highlight My devices and click Select, or just press 2.
Put your remote device into pairing mode. You can find out how to do this from the manual that came with the device. When the device is in pairing mode, highlight Search new device and click Select.
If Bluetooth is not activated on your G600, you'll be prompted to switch it on. Click Yes.
The G600 will search for all the Bluetooth devices in the proximity. The type of device will be indicated by the icon to the left of it, so you can clearly see if the device is a PC, a phone or a remote headset.
You'll be asked to enter the PIN number to connect to the device. This is in the documentation that came with the remote device but if in doubt, try 1234 or 0000, as these are the most common PINs.
Once connected, the device's icon will turn orange on the My devices screen, and when you press the red End call key to return to standby mode, you'll see the headphone icon on the top row of the screen.
Your headset will now be paired permanently with your G600. Switch the device off to disconnect it, and next time you switch it on the phone will connect automatically, providing your Blueooth is activated (go to Menu, Applications, Bluetooth, Activation, On to activate Bluetooth).

My apologies for the copy past guide, I have never used a samsung phone.

I have samsung sgh-a707 phone cannot pair my new plantronics 521blue tooth.I search but get "no devices found".is it the phone or bluetooth?Help

Try 0000