Hiw do I disconnect my bluetrek from my phone

Sounds like a software [firmware] problem. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box.
http://electronicshelponline.blogspot.com/

Were you able to find anything on the BlueTrek website ? http://www.bluetrek.com/search.php?searchtext=manual

or from:
http://www.manualslib.com/manual/397853/Bluetrek-Compact-Classic.html

First, here is the link to the manual:
http://www.bluetrek.com/getfile.php?source=/download/product_download-manual63.pdf&filename=CompactClassic+Manual%2C+English&file_extension=pdf
Here are the instruction: 1. Switch on your Bluetrek and press and hold Talk button and Vol+ button for about five seconds untill indicator light flashes red and blue alternatively and you will hear a sound from speaker.
2. Open bluetooth in Iphone 3 search for bluetooth device. You will see Bluetrek Compact Classic. Click on name to pair and enter "0000" as pin code.
Bluetrek will be connected to iPhone.

Try this:

1. Put them close together
2. Switch on phone and select bluetooth discover mode (make sure it's visible to other devices)
3. Switch your BlueTrek device. Press and hold both Talk and Vol+ button for about 5 seconds until the indicator light flashes red and blue alternatively and sound can be heard from the speaker.
4. The phone should then detect the Bluetrek device. Follow the instructions from the phone to accept the pairing request. If you didn't change it, the PIN code should be 0000 (zeroes).

Hope this helps.

The Bluetrek Mini pairing password is “0000”, four zero. I found this pairing instruction from their website :
http://www.bluetrek.com/file/product-how_to_pair10.jpg
Hope this help!

Your headset's pairing code is '0000' (four zeros). By the way, if you happen to miss its user guide, feel free to download it from this location.
Hope you are able to sort your problems out soon.
Regards, Carlos

On your phone search for the bluetrek. Once found, unplug your bluetrek and hold the button down for at least 7 seconds until you hear the tone. Then enter the passcode "0000". I have the rumor touch and this worked for me.

Pairing the BLUETREK® G2
Before using the BLUETREK® G2 headset, you must pair it with your Bluetooth® mobile
phone. Pairing is the process of linking 2 Bluetooth® devices, so that they can
communicate.
To initiate pairing:
1. Place the BLUETREK® G2 and your mobile phone within 0.3 meter (1 foot) from
each other.
2. Switch on your phone and select its Bluetooth® discover mode (refer to the
Bluetooth® mobile phone user manual).
3. When the BLUETREK® G2 is switched off, press and hold the TALK button for
about 7 seconds until the indicator light flashes red and blue alternatively. And a
sound can be heard in the speaker.
4. Once the mobile phone detects the headset, a “BlueTrek G2” message will be
displayed. Follow the phone instructions to accept the pairing. The PIN code (or
passkey) is 0000, then press “yes” or “ok”.
If pairing success, the indicator light will switch to blue and flashes slowly.
If you haven’t started the discovery mode within 5 minutes, the headset

RATE THIS SOLUTION
RNJ VINOD KUMAR

The default password is "0000" four zeros. You can download the manual & pairing guide on the link below: http://www.bluetrek.com/support/g2/index.htm Please update the question & let us know if the information given was useful to you - Good Luck!

Just had the same problem.

But I found some bluetrek instructions on the net & it works

 

Pairing the BLUETREK® G2

Before using the BLUETREK® G2 headset, you must pair it with your Bluetooth® mobile

phone. Pairing is the process of linking 2 Bluetooth® devices, so that they can

communicate.

To initiate pairing:

1. Place the BLUETREK® G2 and your mobile phone within 0.3 meter (1 foot) from

each other.

2. Switch on your phone and select its Bluetooth® discover mode (refer to the

Bluetooth® mobile phone user manual).

3. When the BLUETREK® G2 is switched off, press and hold the TALK button for

about 7 seconds until the indicator light flashes red and blue alternatively. And a

sound can be heard in the speaker.

4. Once the mobile phone detects the headset, a “BlueTrek G2” message will be

displayed. Follow the phone instructions to accept the pairing. The PIN code (or

passkey) is 0000, then press “yes” or “ok”.

If pairing success, the indicator light will switch to blue and flashes slowly.

If you haven’t started the discovery mode within 5 minutes, the headset