I am trying to switch my PS3 to HDMI on my sony Bravia KDL-40V2000. So I connect my HDMI cable to the T.V. and I open the PS# on regular resolution. When I open the PS3, i get a message saying "An available HDMI device was detected. Do you want to output video and audio using HDMI?" This obviously means that the HD cable works. However, when I say yes, I go the AV which is meant for HDMi, AV4 in my case, and I find nothing but a blank screen.
What do I do??!!
try this
in standby mode (red light).
have you tried both HDMI ports on the tv
has the ps3 ever worked on the TV
the steps that i have told you above do it with just the HDMI plug in the ps3 and the power plug ignore the SCART or PHONO jacks
i dont say anything about resetting the ps3 in my second post
try plugging the hdmi plug in a different hdmi port on the back of your tv
your tv has two hdmi ports try the other one
also double check that the AV channel is correct by lookinh at the back and reading the av number where the hdmi plug is plugged in to the tv
whty are you posting the same thing over again i did say reset the ps3 i said try a different port
you tv has two ports ive checked online
your tv only has one
soemone labled the link and pdf incorrectly
×
Plug ur xbox in ur old tv (which u used to play)
1. connect through hdmi port or av port
got o setting---video settings- video output change to automatic or whichever port u like
2. now pulg to other tv
3. make sure hdmi is compact for ps3
4.unplug the av cable , use only hdmi
5.u can see when u switch on the ps3 there will slight flikkering in the monitor then so u are connected the right cable .
5.some pc monitor are not supported for ps3 in hdmi
1,211 views
Usually answered in minutes!
Thanks a lot for the quick response. There are just a few things i want to clarify
1 - I have a PS3 not an xbox
2 - When I am not using HD (On normal resolution, I'm not on a different T.V., I'm just on another AV (external output)
I tried switching to HDMI settings then removing my av cables, but there was still no picture :(
Do you have any other suggestions
I tried that numerous times as well, but it didn't work. I think the problem is with the T.V. not the ps3. When I press yes to change to hdmi settings, the screen in the external output for normal resolution disappears (Which is normal), however I year a click or beep right after. I don't know what that is. When I go to hdmi external output (AV4) I can't see anything as well. So when i press yes, I can see a screen on neither the external output for normal resolution or hdmi
The TV only has one HDMI port
Yes, the ps3 works on the TV and I have played using HD numerous times
Like I said, I think the problem is from the TV not the PS3 itself. So I think there will be no difference if I reset the ps3 that way. I have tried numerous times anyway
Like I said, I think the problem is from the TV not the PS3 itself. So I think there will be no difference if I reset the ps3 that way. I have tried numerous times anyway
Sorry if there was a misunderstanding. I misread your words
I don't think there is another one, im downloading the guide for my tv model to double check
I am positive that the av i am on is for the hdmi. I have used the hdmi numerous times before on this av and it even says hdmi in the back of the tv
Sorry that was an accident
Like I said before... I cannot find the second port so I am downloading the manual for my tv model to find out where it is.
Are you sure there are two hdmi ports, i downloaded the manual and the diagram only labels one. I might be wrong, but I have searched everywhere for another port and I can't find anything :(
×