Ge jvm1650sh01 surface light doesnt work/ vent

Question 1

0helpful

1answer

GE Spacemaker XL1800 JVM1850CH01 vent fan won't turn on

Unplug for about 5 minutes and allow to reset. If the problem persist, you might want to try replacing the control panel (the one that have all the numbers and timers). Good Luck!

Jan 13, 2014 • GE Spacemaker JVM1640SJ Microwave Oven

0helpful

1answer

Ge space maker Ge model jvm1650sh01. Serial hg

It may be a defective upper or lower door switch (or either switch's mount may be bad) or a stuck relay on the control circuit board.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Our file on door switches is here.

After you or a friend look that over, if you still have a problem, we repair these control boards for $39.95 with a one-year guarantee.

Instead of having yours repaired, you can buy a new control circuit board from the Pros here, our favorite supplier.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Jul 07, 2011 • GE Microwave Ovens

0helpful

2answers

Microwave comes on but does heat

mine does no work either

Nov 08, 2009 • GE Spacemaker JVM1640SJ Microwave Oven

0helpful

1answer

Venting hood not working on microwave mdel# JVM1630BJ03

Start the fan and check the outside vent first.I have found the weatherstrip on the exterior damper can get coated with grease and will become stuck and not allow the damper to open.

Apr 08, 2009 • GE JVM1630 Microwave Oven

0helpful

1answer

Vent motor turns on, but does not draw air in as it should...

the vent tube in back may not have been changed over they can be vented or ventless but you must switch the flap in back you had the answer in your question ... good job,,..lol

Jan 13, 2009 • GE Spacemaker JVM1640SJ Microwave Oven

0helpful

1answer

The vent fan and surface light do not work

1. Check your circuit breaker for this m/w. Reset it.
2. Microwaves usually have 20A fuse inside. It could be broken.

I’m happy to help further over the phone at https://www.6ya.com/expert/vitaliy_f406165329c75ede

Dec 01, 2008 • GE Spacemaker JVM1640SJ Microwave Oven

0helpful

1answer

Surface Light & Vent Fan Won't Work

We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide for $39.95 postpaid.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This can often also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too.

Details of our service and critical safety information and disassembly information is at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

We're happy to help and we appreciate your thoughtful rating of our answer.

Mar 17, 2008 • GE JVM1440 Microwave Oven

0helpful

1answer

1800 XL JVM1860BD - won't work

It sounds like your controller may be failing. Or it could be an electrical line problem. Any other electrical itmes giving you trouble? Has anyone measured the voltage level of your power line? It should be around 110-125 volts AC. If it's significantly lower or higher, you may have a bad connection in your breaker panel or in the wiring leading to the home.

Aug 14, 2007 • GE Spacemaker JVM1640SJ Microwave Oven

1helpful

1answer

Glass Surface Light Lens Cracks from Halogen lights use

The lights do get very hot, so they must be a sufficient distance from the lens. Was there an instruction sheet with the new lens? You may need to adjust the sockets upward. You might call a local GE-authorized servicer to see. Concerning the vent fan, this is a problem with the control panel assembly, which we repair nationwide for $39.95. Details are at our site, which is linked at our listing here on FixYa: http://tinyurl.com/yzjozk

Aug 06, 2007 • GE XL1800 1100 Watts Microwave Oven

1helpful

4answers

GE Microwave Spacemaker oven, Model JVM240

That would almost certainly be a problem on the control circuit board. If the bulbs happen to short / blow out or if they are removed or installed while the microwave is still plugged in, there is often an arc which causes damage to the board. We repair regularly these boards for such problems for $32.50 nationwide.

Dec 23, 2006 • GE Spacemaker JVM1640SJ Microwave Oven

Question 2

William Miller

GE Master 9,179 Answers
Posted on May 06, 2010

William Miller

GE Master

Joined: Sep 15, 2006

Answers

9179

Questions

3

Helped

4478224

Points

21747

We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid in about a week or so.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This can often also affect the exhaust fan, cooling fan, turntable, and/or inside light operation, too.

Details of our service are at our Web site, along with a video showing how to remove a typical over the range control panel assembly in under 5 minutes.

Feel free to contact me directly with your brand, full model number and symptoms.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller
[email protected]
http://www.microwavedisplay.com

Related Topics:

Trustworthy Expert Solutions

Ge jvm1650sh01 surface light doesnt work/ vent

1 Answer

William Miller

Add Your Answer

Attachments: Added items

Related Questions:

GE Spacemaker XL1800 JVM1850CH01 vent fan won't turn on

Ge space maker Ge model jvm1650sh01. Serial hg

Microwave comes on but does heat

Venting hood not working on microwave mdel# JVM1630BJ03

Vent motor turns on, but does not draw air in as it should...

The vent fan and surface light do not work

Surface Light & Vent Fan Won't Work

1800 XL JVM1860BD - won't work

Glass Surface Light Lens Cracks from Halogen lights use

GE Microwave Spacemaker oven, Model JVM240

Not finding what you are looking for?

JVM1650 1000 Watts Microwave Oven

GE Spacemaker XL1800 JVM1850CH01 vent fan won't turn on

Ask a Question

Top GE Microwave Ovens Experts

vince

Cindy Wells

NOEL

Are you a GE Microwave Oven Expert? Answer questions, earn points and help others

Manuals & User Guides

. JVM1650 1000 Watts Microwave Oven...

. JVM1650 1000 Watts Microwave Oven...

Related Topics:

Trustworthy Expert Solutions

Ge jvm1650sh01 surface light doesnt work/ vent

1 Answer

William Miller

Add Your Answer

Attachments: Added items

Related Questions:

GE Spacemaker XL1800 JVM1850CH01 vent fan won't turn on

Ge space maker Ge model jvm1650sh01. Serial hg

Microwave comes on but does heat

Venting hood not working on microwave mdel# JVM1630BJ03

Vent motor turns on, but does not draw air in as it should...

The vent fan and surface light do not work

Surface Light & Vent Fan Won't Work

1800 XL JVM1860BD - won't work

Glass Surface Light Lens Cracks from Halogen lights use

GE Microwave Spacemaker oven, Model JVM240

Not finding what you are looking for?

JVM1650 1000 Watts Microwave Oven

GE Spacemaker XL1800 JVM1850CH01 vent fan won't turn on

Related Topics

Ask a Question

Popular Questions

Microwave shuts off after a few seconds

Microwave beeping and says keypad short may need

Our GE microwave steam sensor is not working; when we put in a bag of popcorn or other food and press sensor cook, it heats but will not count down time and automatically turn off. Model JVM1752SP1SS.

Ge profile spacemaker XL 1800 undercabnet microwave

What size bolts screw into the top of microwave

Top GE Microwave Ovens Experts

vince

Cindy Wells

NOEL

Are you a GE Microwave Oven Expert? Answer questions, earn points and help others

Manuals & User Guides

. JVM1650 1000 Watts Microwave Oven...

. JVM1650 1000 Watts Microwave Oven...