MCP61 lan card driver for linux - Computers & Internet

The connecting to internet is very easy in linux .

There are many steps but i am saying simple one

Initially configure the adsl router with ppoe over ethernet and enable dhcp address option.

Next plug the ethernet cable from router to the inteface of lan card.

Boot the redhat machine.

In the system-->Administration-->network options check whether lan card is detected and active .

If the lan card is not active activate and save

In lan card select option assign assig ip automatically

check whether ip is assigned by using command ifconfig .

hello, if i am correct then this card is installed in Epson Projector. there are no direct download for linux(ubuntu) drivers for this card. you maybe able to contact Epson and request drivers for linux or you try linux wireless driver site by HP.
try the link below:
http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/

also there is program called "driverloader" which take windows drivers and creates a wrapper that can be used in linux, you can try to see if that works for you. its free to try for 30 days and then its priced reasonably.
link for "driverloader"
http://www.networkworld.com/columnists/2005/092605blass.html

hope this helps.
regards
Amar Sondhi

try any linux based live cd....like puppy linux..it configures drivers and internet automaticly....and u can configure it also manualy..and after that u will now if the prob is frome the mother board!!!!
..live cds....are the best way to test ur pc....;)

Hmm, i'm not speaking from too much experience here, but not all hardware is compatible with linux, it is running on a different kernel from windows, works in a different way, and i'm honestly amazed at the length people go to make hardware compatible with linux, HOWEVER, if you look up some sort of driver for it, you may have some luck :S sorry i couldn't be of more help, i use windows more than linux

Who told you that this MB is not Linux compatible? There is no reason that this MB should not work with REDHAT, DEBIAN, or any other flavor or Linux. The Realtek driver is generic to REDHAT and it should find the hardware automatically. What is your specific problem?

you have to installed the linux support driver of your usb adapter

Installed on this board a few days ago and worked fine.

Realtek RTL8169-8110 Family Gigabit Ethernet NIC

Driver Provider: Realtek Semiconductor Corp.

Driver Date: 7/17/2008

Driver Version: 5.699.717.2008

please go to the following web site and download the Driver and Instructions--

http://www.cyberciti.biz/tips/linux-install-and-configure-dlink-dwl-g-520-wireless-lan-pci-card.html

can't fund lan

first, check your cable. loose cable connection often lead the cause of that error. second. check the lan card of your linux pc. If your pc is a desktop type pc, try to replace the lan card and . Make sure that the lan card is detected by your system. try to connect on the internet again.




A Simple Thanks is Good Enough