I WANT TO BE ABLE TO PRINT FROM MY COMPUTER TO MY PRINTER

Add Printer Wizard

1. Log in as Administrator
2. Click Start > Printers and Faxes > Add a Printer
3. Click NEXT
4. Choose Local Printer Attached to this Computer
5. If attaching USB, detect printer, otherwise if using an IP do not check “Automatically detect and install my Printer”
6. If not using USB, choose, “Create a New Port”. The type of port is “Standard TCP/IP Port”
7. A new wizard will open if you setup for IP.

Add Standard TCP/IP Printer Port Wizard

1. Click Next
2. Under Printer Name or IP Address enter the IP
3. The port name will automatically become IP_[IP address], you want to leave this.
4. Hit Next
5. Chose Generic Network Card.
6. Click FINISH

Add Printer Wizard (Continued)

1. Choose a driver, most likely need to click “Have disk”
2. Browse for the INF in the driver folder click next
3. choose printer name
4. Allow files to copy.
5. Click FINISH

Add Printer Wizard

1. Log in as Administrator
2. Click Start > Printers and Faxes > Add a Printer
3. Click NEXT
4. Choose Local Printer Attached to this Computer
5. If attaching USB, detect printer, otherwise if using an IP do not check “Automatically detect and install my Printer”
6. If not using USB, choose, “Create a New Port”. The type of port is “Standard TCP/IP Port”
7. A new wizard will open if you setup for IP.

Add Standard TCP/IP Printer Port Wizard

1. Click Next
2. Under Printer Name or IP Address enter the IP
3. The port name will automatically become IP_[IP address], you want to leave this.
4. Hit Next
5. Chose Generic Network Card.
6. Click FINISH

Add Printer Wizard (Continued)

1. Choose a driver, most likely need to click “Have disk”
2. Browse for the INF in the driver folder click next
3. choose printer name
4. Allow files to copy.
5. Click FINISH

Customizing Settings (Do this or some options may not display when you print)

1. Right click the printer
2. Select properties
3. click on “Device option Settings”
4. Add components until the picture matches your unit.
The names are ambiguous, so here is a list of translations.
a.Tray 3 and Tray 4 are optional trays
b.LCC - Large Capacity Cabinet
c.AD-16 – Duplex and Switchback Unit
d.HDD-6 – Hard disk drive kit
e.JS-203 – Job Separator Tray
f.FN-117 – Finisher Tray

Customizing Settings (Do this or some options may not display when you print)

1. Right click the printer
2. Select properties
3. click on “Device option Settings”
4. Add components until the picture matches your unit.
The names are ambiguous, so here is a list of translations.
a.Tray 3 and Tray 4 are optional trays
b.LCC - Large Capacity Cabinet
c.AD-16 – Duplex and Switchback Unit
d.HDD-6 – Hard disk drive kit
e.JS-203 – Job Separator Tray
f.FN-117 – Finisher Tray

You may need to update the driver, but it'll work. Try this site to get the Vista/Win7 drivers.

(If you absolutely can't get it to work, the HP Laserjet 4 PS driver works for almost any Postscript printer. But try the driver above.)


You may need to update the driver, but it'll work. Try this site to get the Vista/Win7 drivers.

(If you absolutely can't get it to work, the HP Laserjet 4 PS driver works for almost any Postscript printer. But try the driver above.)