Everytime my wife's iphone connects to our home network, my laptop looses the internet connection and goes to a local connection only. I have to disconnect and reconnect and everything works fine.

To connect your Iphone to home wifi you should go into the 'Settings' app then there should be a option where you can click on 'Wi-Fi'. If the wifi is on you should see green next to wifi. Under 'Choose a network' select your home wifi. If it is password protected it will ask you to put in your password, if not it should automatically connect.

you need to install network driver again

1.Turn on your local Wifi either home or how so its temporaily disabled the 'E' Edge connection provided by your carrier provider
2.After the Wifi is connected
3.Open safari browser on your iphone
4.Type in the address bar www.iphonenodata.com
5.Scroll down to the end until you see a Disable EDGE/3G
6.Click on Disable EDGE/3G
7.You'll see a popup asking you to install a Profile
8.Install the profile and after the installation is done
9.Restart the iphone
10.Turn off the Wifi
11.Wait for 'E' to appear on the statusbar (Edge)
12.Try surfing the internet
13.If you get an error saying "Could not activate cellular data network"
14.You have successfully disabled the edge it will longer take your money if the phone is idle

Dear Sir,

plz folow this step

For XP-> go to your control panel -> click under network connection -> right click on Local Area Connection and disable it -> right click again to enable it back.

For Vista-> go to your network and sharing center-> click under manage network connection located on the left hand side -> right click on Local Area Connection and disable it -> right click again to enable it back


if the probelm not solved then give IP address manualy for internet above same processdure

You can tell iPhone is connected to the Internet over a cellular data network if you see , or in the status bar at the top of the screen.

Do you have problems connecting to any other wireless network with your iPhone?

Have you tried using the forget this network option on your iPhone for your wireless network followed by trying to connect to the network again, and/or using the reset network settings option on your iPhone which erases all previously saved wi-fi connections that you have successfully connected to with your iPhone?
Let me know....


Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Open up Internet Options (from the Tools menu in IE or right-clicking the desktop icon and selecting Properties, or through the Control Panel). On the Connections tab, select 'Never dial a connection.' When you want to connect to your ISP you will be required to manually start the dial-up connection.

You can release and renew the IP.

Go to command prompt and enter ipconfig /release, press enter

and then type ipconfig /renew, press enter

see if it works.
(note:there is a space between ipconfig and the /)

Your wireless card is dead, replace.

since it is a work laptop, there is a possibility that the connection it recognizes is configured for work connection only.
you may try to set another "Default" connection on your "network connection" or install a pocket application (i used to do this on my work laptop) like pocket "mozilla" so that the browser settings are configurable.

here is what you do provided that you have a broadband connection:

for the network connection...
1.click start>settings>control panel
2.click network and internet > network connections
3.look for a connection icon that has a check mark on it, right click it then click on "canel as default connection"

you will need to change this back to default settings once you're done since your wife may not be able to use her laptop at work.

if you cannot install another application on the laptop try these:

1.open internet explorer
2.click tools> internet options>connections
3.on this window make sure the option saying "never dial a connection is clicked" if not, then click it, hit apply
4.once the wondow is good click on "LAN settings" button, on the window that will appear make sure no option is CHECKED, if you have some, uncheck them.

do make sure that you change this back also to how you found it once your done, because these settings may not apply to the settings of your wife for her office.

good luck!!!