All 4 Igniters keep firing after the burner is lit.

My Viking stove igniter won't stop clicking. Both igniters on one side are clicking over and over

I have the same problem all but one burner. When using the other burners the igniters keep sparking after being lit. What do I replace?

All of the igniters are connected to one source. A series of small switches mount on each stem of each burner. Any of them can fire up the spark box and it in turn it fires off all the ignitors. If a boil over spills liquid into one or more of them switches the resulting continuity causes the clicking. Removing one wire at a time from each switch till the clicking stops is the solution.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

clean the knob control by using vaccium,pull the knobs then clean it.make sure how to remove the knob,same position to returrn the knob

Go to RepairClinic.com and check on how much a new igniter is. Is there two or 4 igniters on your model (lift the top of the range up and it is the little silver piece sticking out with a white base around it), If its 2 is the other side working? Make sure there is no food deposits around where the gas and the spark meet.

there should be 2 d size batteries in the bottom ov the oven just replace them that should stop it i had the same problem

when you cleaned the unit you may have gotten water in side the igniter, dry it out w/ a hair dryer. Once dry should work .

When cleaning, if the control switches get damp, they will react as you describe.
Unplug the appliance, use a hair dryer and attempt to dry the switches.
Leave it unplugged overnight and try them again tomorrow.
They will eventually dry and be OK.

sounds like you have a bad switch. maybe on the large burner.. some of those switches can be replaced without the whole harness.

I would try cleaning the burners. You can purchase cleaning brushes made specifically for this purpose and they work like a charm.