How do i scan a document on the Kodak 5300 AOI using Microsoft Word XP. Where do I locate the menu drop down to retrieve the scannned document from the scanner?

Dallis,

1. Please power on the scanner.

2. Place the document to be scanned in the scanner face down and close the lid.

3. Start the word processor.

4. In the File menu you will find an option to either scann a document or Import from scanner. Use this and start the Scan Document.

5. First you will get a rough scanned image. Set it right for everything to be scanned by using a dotted rectangle on the scanned image. Once that is done, then use the SCAN option and you will get the final scanned image.

6. Save it to a folder.

This is easily accomplished using Kodak AIO Home Center v5.3:

Scanning documents from Home Center
1 On the main screen, click Scan Documents and Pictures.
2 Place your original document face down on the scanner glass.
3 Select Document.
4 Select the type of document you are scanning.
5 Select a Resolution for your scan from the drop-down list.
6 Select Perfect Page Technology to automatically correct imperfections in the scan.
7 Select Next.
8 On the Edit screen, edit each image as needed.
9 Click Next.
10 Select Save to File, then select Save As (pdf or rtf), Then Save.
11 Select Done to return to the main menu.

Hello,

You can download printer driver from Kodak, click here.

CompQ

it is a scanning error............ scanning usually take 1-2 minutes to scana document. make sure dat u've proper ink in ur cartridges. contact kodak@ 1800 21 6699 for further issues.

Instead of pressing the start button to print, you need to press the small ON/OFF button. The start button works to copy/scan. But to print, you will need to turn the printer on first. Once the printer is on, the computer should recognize it fine and allow you to print from your applications.

For WINDOWS VISTA/XP Operating Systems:

1. Go to:
• C:>Windows>twain_32>Kodak>Kds_aio5000
• C:>Windows>twain_32>Kodak>Kds_aioesp
  
  
2. Confirm the folders Kds_aio5000 and Kds_aioesp are available in C:>Windows/twain_32/Kodak.
   
   NOTE: If these folders are missing, the following error codes will be generated:
• 1-2036 when scanning
• 1-2037 when printing

If the error condition continues:

1. Right-click the KODAK AiO Home Center icon.
2. Click Properties, then select the Compatibility tab.
3. Clear all checked boxes.
4. Click Apply, then OK.
5. Scan a document from the Home Center.

are getting any error msg like 1-2036 or anyother and are you using Vista or Xp,,,,try using the windows fax and scan settings....let me know and i will try and help you

RTFM Answer is on page ID 10T of the users's manual

Greetings Jackie,

Sounds like you have a failed .netframework installation. This is a Microsoft feature, but is delivered during installation of Kodak software as well. To fix this, do the following.

1. Open the Control Panel.
2. Double-click Add / Remove Programs (Windows XP only).
3. Select Microsoft .NET Framework 2.0.

IMPORTANT: If other versions of Microsoft .NET Framework are listed, do not perform this operation on those other versions. Follow this procedure ONLY for Microsoft .NET Framework 2.0.

4. Click Change / Remove.
5. Select Repair, and click Next.
NOTE: A progress bar shows the repair progress.
6. After the repair is complete, make sure the Restart the computer check box is selected, and click Finish.
7. After the computer restarts, start the KODAK AiO Home Center software.
IMPORTANT: If the KODAK AiO Home Center software fails to start or continues to display an error message, completely uninstall Microsoft .NET Framework 2.0 and do a clean reinstall KODAK AiO Home Center software. The Microsoft .NET Framework 2.0 will also be reinstalled with the KODAK AiO Home Center software.

1. Follow steps 1 - 4 above.

2. Select Uninstall, and click Next.

IMPORTANT: Uninstall ONLY Microsoft .NET Framework 2.0. If other versions of Microsoft .NET Framework are listed, do not uninstall them.
3. Restart the computer.

4. Perform a clean re-installation of the KODAK AiO Home Center software:

a. Disconnect all USB devices from the computer, including the Kodak EasyShare all-in-one printer.
NOTE: Do not disconnect your mouse or keyboard.

b. Uninstall the Kodak EasyShare 5000 series all-in-one software:
i. In the Control Panel, select Add or Remove Programs (Windows XP).
ii. Select one of the following software programs from the list of currently installed programs, depending on which one appears in your list:
• Kodak EasyShare software
• Kodak all-in-one printer software
• Kodak EasyShare 5000 series all-in-one software
iii. Click Change or Remove (Windows XP).
iv. When the Install Wizard appears, click Next.
v. Depending on the issue(s) you are experiencing, do the following:
• If you are experiencing errors with the Kodak EasyShare software, such as a Tricode, in addition to errors with the KODAK AiO Home Center software, select Remove, click Next, and follow the on-screen instructions for removing the software.
• If you are not experiencing errors with Kodak EasyShare software, select Modify to uninstall only KODAK AiO Home Center software, and click Next.
vi In the Custom Setup window, select Remove from the drop-down menu for the Kodak All-in-One Printer, and click Next.
vii. In the Ready to remove the program window, click Next.
viii. In the Uninstall Complete window, click Continue.
ix. Restart the computer.
c. Delete the files and folders that can interfere with the installation:
• Printer folder in C:\Program Files\Kodak
• Both the Eastman Kodak Company and KDS_Kodak folders in C:\Documents and Settings\All Users\Application Data
• Kodak 5000 Series AiO folder in C:\Documents and Settings\All Users\Application Data\Kodak
• Printer folder in C:\Documents and Settings\All Users\Application Data\Kodak\EasyShareSetup
d. Run Disk Cleanup.
i. Open My Computer.
ii. Right-click Local Disk (C:) and select Properties.
iii. Click the Disk Cleanup button.
iv. When the Disk Cleanup for (C:) window appears, select the Temporary Internet Files, Recycle Bin, and Temporary Files check boxes.
v. Click OK , then click Yes to delete all files and begin the Disk Cleanup.
vi. When the Disk Cleanup is finished, click OK in the Local Disk (C:) Properties window.

e. Shut down all background applications.
i. Select Start > Run.
ii. Type msconfig in the Open field, and click OK.
iii. Select the Startup tab.
IMPORTANT: If not all the applications in the Startup Items list are selected, write down which applications are selected so you know which ones to turn on again later.
iv. Click Disable All , then click OK .
v. When prompted, restart the computer.

f. After the computer restarts, insert the KODAK EASYSHARE 5000 Series All-in-One Software CD into the computer CD drive to begin the installation.

g. During the installation process, when prompted, select to search for an updated version of the software on the Kodak Web site and install the updated version.

h. Before restarting the computer again, turn on the background applications.
i. Select Start > Run.
ii. Type msconfig in the Open field and click OK.
iii. Select the Startup tab.
iv. Under Startup Items:
- If only some items were originally selected, select the check box in front of the items that you noted in Step e-iii.
- If all background items were originally selected, click Enable All, and click OK.

i. Restart the computer.
Once restarted, you should be OK.If not call our 800 421 6699 and they will help further.
Best Regards,
Ron Baird - the friendly Kodak guy

Sorry to hear about your trouble. Since I am not sure of the details, let me offer a long review and suggestion. It may work for you, especially if the AiO software is not installing correctly.

If the KODAK AiO Home Center software fails to start or an error message appears, there may be a problem with the Microsoft .Net Framework 2.0 installation. To resolve this condition:

1. Open the Control Panel.
2. Double-click Add / Remove Programs (for Windows XP) or Programs and Features (for Windows Vista).
3. Select Microsoft .NET Framework 2.0.

IMPORTANT: If other versions of Microsoft .NET Framework are listed, do not perform this operation on those other versions. Follow this procedure ONLY for Microsoft .NET Framework 2.0.

4. Click Change / Remove (for Windows XP) or Uninstall (for Windows Vista).

5. Select Repair, and click Next.
NOTE: A progress bar shows the repair progress.

6. After the repair is complete, make sure the Restart the computer check box is selected, and click Finish.

7. After the computer restarts, start the KODAK AiO Home Center software.

IMPORTANT: If the KODAK AiO Home Center software fails to start or continues to display an error message, completely uninstall Microsoft .NET Framework 2.0 and do a clean reinstall KODAK AiO Home Center software. The Microsoft .NET Framework 2.0 will also be reinstalled with the KODAK AiO Home Center software.

1. Follow steps 1 - 4 above.

2. Select Uninstall, and click Next.
IMPORTANT: Uninstall ONLY Microsoft .NET Framework 2.0. If other versions of Microsoft .NET Framework are listed, do not uninstall them.

3. Restart the computer.

4. Perform a clean re-installation of the KODAK AiO Home Center software:

a. Disconnect all USB devices from the computer, including the Kodak EasyShare all-in-one printer.
NOTE: Do not disconnect your mouse or keyboard.
b. Uninstall the Kodak EasyShare 5000 series all-in-one software:

1. In the Control Panel, select Add or Remove Programs (Windows XP) or Program and Features (Windows Vista).
2. Select one of the following software programs from the list of currently installed programs, depending on which one appears in your list:

Kodak EasyShare software
Kodak all-in-one printer software
Kodak EasyShare 5000 series all-in-one software

3. Click Change or Remove (Windows XP) or Uninstall (Windows Vista).
4. When the Install Wizard appears, click Next.
5. Depending on the issue(s) you are experiencing, do the following:

- If you are experiencing errors with the Kodak EasyShare software, such as a Tricode, in addition to errors with the KODAK AiO Home Center software, select Remove, click Next, and follow the on-screen instructions for removing the software.
- If you are not experiencing errors with Kodak EasyShare software, select Modify to uninstall only KODAK AiO Home Center software, and click Next.

6 In the Custom Setup window, select Remove from the drop-down menu for the Kodak All-in-One Printer, and click Next.
vii. In the Ready to remove the program window, click Next.
viii. In the Uninstall Complete window, click Continue.
ix. Restart the computer.

c. Delete the files and folders that can interfere with the installation.

For Windows XP, delete:
i. Printer folder in C:\Program Files\Kodak
ii. Both the Eastman Kodak Company and KDS_Kodak folders in C:\Documents and Settings\All Users\Application Data
iii. Kodak 5000 Series AiO folder in C:\Documents and Settings\All Users\Application Data\Kodak
iv. Printer folder in C:\Documents and Settings\All Users\Application Data\Kodak\EasyShareSetup

For Windows Vista, delete:
i. Printer folder in C:\Program Files\Kodak
ii. Eastman Kodak Company folder in C:\ProgramData
iii. Eastman Kodak Company folder(s) in C:\Users\your name\AppData\Local

d. Run Disk Cleanup.

i. Open My Computer.
ii. Right-click Local Disk (C:) and select Properties.
iii. Click the Disk Cleanup button.
iv. When the Disk Cleanup for (C:) window appears, select the Temporary Internet Files, Recycle Bin, and Temporary Files check boxes.
v. Click OK , then click Yes to delete all files and begin the Disk Cleanup.
vi. When the Disk Cleanup is finished, click OK in the Local Disk (C:) Properties window.

e. Shut down all background applications.

i. Select Start > Run.
ii. Type msconfig in the Open field, and click OK.
iii. Select the Startup tab.

IMPORTANT: If not all the applications in the Startup Items list are selected, write down which applications are selected so you know which ones to turn on again later.

iv. Click Disable All , then click OK .
v. When prompted, restart the computer.

f. After the computer restarts, insert the KODAK EASYSHARE 5000 Series All-in-One Software CD into the computer CD drive to begin the installation.

g. During the installation process, when prompted, select to search for an updated version of the software on the Kodak Web site and install the updated version.

h. Before restarting the computer again, turn on the background applications.

i. Select Start > Run.
ii. Type msconfig in the Open field and click OK.
iii. Select the Startup tab.
iv. Under Startup Items:

- If only some items were originally selected, select the check box in front of the items that you noted in Step e-iii.
- If all background items were originally selected, click Enable All, and click OK.

i. Restart the computer.