Trying to syn music to my mp3 insignia

MP3 players can only play music files in mp3 file format. You can download mp3 music files onto your computer and then copy them to your MP3 player.
For CD disks you need to convert your CDs to mp3 music files onto yourcomputer or download them from the Internet and then copy them to your MP3player.
You can do this using Windows Media player and Rip the CDs - Media Player willcreate a MP3 music file for each music track.
Click on this link for instruction on converting music files to mp3 file format:- http://www.fixya.com/support/r5798418-creating_transferring_mp3_music_files

I found a suggestion on your site to turn off the MP3 player and disconnect from port - then while holding down the volume button I reconnected it and continued to hold down the button for about 50 seconds. It may not be what fixed it but the computer recognized the player as new hardware and I was able to go to the Media Player and syn - the next time I booted up my computer the little "found new hardware" icon appeared - and kept appearing until the noise drove me crazy - but I restarted the computer and it went away. Thanks!

format first your mp3 player using the pc format option then after that try syncing it again.it should wowrk fine now

Windows Media Player 11 ruins this player. Uninstall Windows Media Player 11, and roll back to Windows Media Player 10. Then use version 10 to sync songs to your device.

burn the music you PAID for to a cd then rip it back to the system and use Windows Media Player 11 to sync the files to the device (only works if you have a burn feature in rhapsody)

Windows Media Player will see it all the time and is more compatible then Rhapsody with the device

Most likely a issue in the FAT or similar table. The tables used on the internal memory is allocated only for short files names since most media managers change the file names to fit 8.3 dos. They do this since mp3 and mwa audio files use id tagging. So try renaming your mp3's that its eight letters or numbers then the three letter extension .mp3 = rap0001.mp3

The songs are in the wrong format

use windows media player. if you go to the top wher eit says now playing library rip burn and sync, choose sync then take songs from windows media player, limewire, or itunes and put them in windows media players then put them in the sync list and connect your mp3 then push start sync once you have all the music you want on the list. hope this helps you =)

For NS-DA1G and NS-DA2G: If you are receiving a SYNC notice, your DRM media license has expired. If you are using a media manager like Best Buy Digital Media Store or Windows Media Player. you will first need to authorize the player as an MTP device (device authorized to play Digital Rights Management song files) and then re-acquire the licenses for the tracks. There should be a button that allows this function in your media software.

If you want to remove your DRM tracks, got to:
MENU - Settings - USB - File & Folder

This puts your player into Mass Storage Mode. Once in this mode the player will act like a USB drive and you can navigate to and delete your unwanted files.

When using your media player... you need to first figure out if you are using windows media player 9 or windows media player 10. Also what windows are you using on your computer, that makes a difference as well... Make sure you have the mp3 player plugged in properly and then...Once you are in your windows media player go to your lib tab... soon as you are in there then on the right side there should be section on where you could build a lib list. Meaning you should be able to pick the songs in your lib and just drag them over. On the bottom you should see something that says sync... Once you've choose your songs and dragged them over... all you should have to do is press the sync button and it will do all the work for you from there. And it should let you know when its complete...mine does. Hope I could help you.