Is there a certin station i have to have it on cause it wont play it turns on and everything but wont play i have the 6 disc changer tho fues are all good wires and everything please help
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Mine did the same thing. My player was primarily used in the garage and the cold weather may have caused my player to do the same thing. I just fixed my player. I removed the top cover and looked at the CD in the play position. In the upper right corner from the CD, you will see a spindle motor with a belt on it. Gently spin the motor back and forth carefully with your finger. I rotated it a half-spin in either direction, careful not to dislodge the belt. When I turned the player back on, the mechanism operated as it normally would and began playing the disc. I was able to eject and reinsert the magazine without any issues, solving the problem. Hopefully that will work for you.
the changer plays through the fm on the radio, you need to find out what station it is tuned to. should be between 88 and 95 or so. you could just try seeking until the changer is picked up.
sounds silly though are the discs put in the right way? i had the same problem and realized i was putting them in upside down lol, failing that take the cover off it, get a cotton bud and some methelated spirits or even deoderant does the same job, spray the cotton bud and wipe it over the lazer while the machine is off, its probably got some dirt on the lense its a common problem, try that and see if it solves your problem. :-)
I believe thats an fm modulated changer. Need to make sure you put it on the correct freq. The one I had needed to be on fm 89.1 or 89.5 to work. Hope this helps.
ON THE REMOTE DOES IT SHOW THAT THE DISCS ARE PLAYING IF -SO CHECK THE ANT CONNECTIONS IF THEY ARE NOT IN THE CORRECT ORDER THEY WILL NOT WORK AND THE SOUND WILL NOT COME OUT OF SPEAKERS I CAN HELP YOU WITH MANUAL CALL 1800 TECH CAR THAT IS PIONEERS DIRECT NUMBER HOPE THAT HELPS
just turn the changer on, make sure it is playing a disk, (and you know whats playing) the press the scan function on your radio til it picks up that signal and lock it in.
×