How do i find the 6 pre programmed emergency channels on my bc72xlt scanner. i don't have a manual for this scanner. all i have used it for is nascar races.

• Before I list the steps on how to Set up your scanner I will say that I can get some frequencies for you if you list your city, state or zip code. I can also give you a manual upon request, free.

1. First step is to get some frequencies.
2. First press the "HOLD" button.
3. Now enter the number for the channel that you want to store a frequency in.
4. Now press "func" and "prg" buttons together and the channel will appear.
5. Now enter the frequencies with the numbers on the keypad, don't forget the decimal [.] .
6. Now press the "E" button to store the frequency.
7. Repeat the above steps until you have all frequencies stored you want.

• If during programming you ever see the word "error" then you entered an invalid frequency.

• If you have any comments please feel free to leave them here.
• Hope this helps and thank you for using FixYa.

Regards, Tony

The best programming instructions for your scanner are in the factory manual that you can download and print, at no cost, here:
http://www.uniden.com/pdf/BC72XLTom.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

The PRO-95 is a pretty good trunking scanner, but it's far from ideal for NASCAR monitoring. You can use it for that purpose, and the best way would be to clear all of the programmed information by initializing the scanner. Instructions for this process are on pace 83 of the factory manual, and the best programming instructions are also in the manual. If you don't already have it, you can download and print the manual, at no cost, here:
http://scancat.com/OnLineHelp/OEM_Radio_Owners_Manuals/RadioShack-OlderManuals/Pro-95/pro95.pdf

You can find a comprehensive database of active frequencies in your area, or at the race track, and a lot of other useful scanning information, by visiting:
www.RadioReference.com.

BTW, the best scanners for following the NASCAR action are the Uniden BC72XLT, BC80XLT, and the BC92XLT. All are simple to operate and moderately priced. You can also pick them up used on many web sites, including eBay.

Bill B.
Listening in since the 60's

You can download and print your scanner manual, at no cost, here:
http://www.uniden.com/pdf/BC72XLTom.pdf

Bill B.
Listening in since the 60's

Send me your email and I will send you a copy of the manual...
73,
Joe-k4jga

push FUNCTION button and then PGM, punch in frequency number and then hit PGM again. I think.

ADRIAN,
If you would like and still are in need of the manual, I have just purchased the very same scanner. I would not mind scanning the manual (on my copier) and emailing it to you. Let me know. PLEEEAAASSSEE no spam. [email protected]. By the way my name is 'CAT'

Try this


http://www.uniden.com/pdf/BC72XLTom.pdf

help me program my uniden bc72xlt scanner got codes

Hi - You can download the manual from the link underlined in blue below:

bc72xlt



Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!