My screen keeps going blank every time i click on anything, for example just another person's profile. My events section is messed up too cause every time i try and attend something there is an error.

You are being 'erased' by the NSA for suspicious activity, Watch your back

No the 3Volt battery is a CMOS battery for keeping data and setting.

example: Boot sequence, time, password ect.

hi there! :) try to clear the cache and cookies it might work! :) here's how: for firefox At the top of the Firefox window, click on the Firefox button and then click Options. Select the Advanced panel. Click on the Network tab. In the Offline Storage section, click Clear Now. for internet explorer 1.On the Internet Explorer Tools menu, click Internet Options. The Internet Options box should open to the General tab. 2.On the General tab, in the Temporary Internet Files section, click the Delete Temporary Internet Files button and Cookies. This will delete all the files that are currently stored in your cache and cookies for google chrome Click the wrench icon on the browser toolbar. Select Tools. Select Clear browsing data. In the dialog that appears, select the checkboxes for the types of information that you want to remove. Use the menu at the top to select the amount of data that you want to delete. Select beginning of time to delete everything. Click Clear browsing data. dont forget to close your browser and open a new one once your computer is done clearing the cache and cookies. hope it works! :)

It probably cannot display the PC resolution, try lower the PC Video reolution to the TV native resolution.
http://s807.photobucket.com/home/budm/allalbums

I'm with telstra and used these settings. If you get stuck go to
www.i9forum.co.uk and register then go to the mms & sms section some phone do use a slight variation on this below.

Step 1 – WAP DATA Account Setup

1. Go to the following menu “MENU > SERVICES > DATA ACCOUNT > GPRS >
Select an empty Account”
2. Edit the following parameters in the account
a. Account Name=Telstra WAP GPRS
b. APN=Telstra.internet
c. User name=[blank]
d. Password=[blank]
e. Auth. Type=Normal
Exit back to MAIN SCREEN.

Step 2 – WAP Setup

1. Go to the following menu “MENU > SERVICES > WAP > SETTINGS > EDIT
PROFILE > SIM 1 or 2 > Select an empty PROFILE > EDIT PROFILE”
2. EDIT the following parameters in the account
a. Rename Profile=Telstra WAP
b. Homepage=http://wap.telstra.com/wap
c. Data Account=Telstra WAP GPRS
d. Connection Type=HTTP
Proxy Address = 010.001.001.181
Proxy Port = 80
e. User Name=[blank]
f. Password=[blank]
3. BACK then ACTIVATE PROFILE and exit back to the MAIN SCREEN.
4. Your Phone is ready to access WAP and MMS services.

Step 3 – MMS DATA Account Setup

1. Go to the following menu “MENU > SERVICES > DATA ACCOUNT > GPRS > Select
an empty Account”
2. Edit the following parameters in the account
a. Account Name=Telstra MMS GPRS
b. APN=Telstra.internet
c. User name=[blank]
d. Password=[blank]
e. Auth. Type=Normal
3. Exit back to MAIN SCREEN.

Step 4 – MMS Setup

1. Go to the following menu “MENU > MESSAGES > MMS > MMS SETTINGS >
SERVER PROFILE > SIM 1 or 2 > Select an empty Account”
2. EDIT the following parameters in the account
a. Rename Profile=Telstra MMS
b. Homepage=http://mmsc.telstra.com:8002
c. Data Account=Telstra MMS GPRS
d. Connection Type=HTTP
Proxy Address = 010.001.001.180
Proxy Port = 80
e. User Name=[blank]
f. Password=[blank]
3. BACK then ACTIVATE PROFILE and exit back to the MAIN SCREEN.
4. Your Phone is ready to access WAP and MMS services.

Facebook changed their site a little bit. News Feed aggregates the most interesting content that your friends are posting, while Live Feed shows you all the actions your friends are making in real-time.

You can control how many friends are shown in Live Feed by clicking "Edit Options" at the bottom of the page.

The News Feed algorithm bases this on a few factors: how many friends are commenting on a certain piece of content, who posted the content, and what type of content it is (e.g. photo, video, or status update).

You can remove friends from the News Feed list (from your default stream) simply by clicking the "Hide" that appears when you hover over their story in your stream.

To add someone back to your News Feed, follow these steps:

1. Scroll down to the bottom of your News Feed and click "Edit Options."
2. If you are looking for a friend, scan the list to find that person. If you are looking for a public profile, select the Public Profiles tab.
3. Click "Add to News Feed" to see their posts again.
4. Click "Close" to save your changes.

To add someone back to your News Feed, follow these steps:

1. Scroll down to the bottom of your News Feed and click "Edit Options."
2. If you are looking for a friend, scan the list to find that person. If you are looking for a public profile, select the Public Profiles tab.
3. Click "Add to News Feed" to see their posts again.
4. Click "Close" to save your changes.

Facebook enables you to see what’s happening with your friends through past events and real-time feeds of information. Highlights and the News Feed were combined into a single stream so that you could have more control over what you view on your home page and stay connected with your friends.

As a result of this change, you’ll notice that the Suggestions section has been moved to the right-hand column of the home page. Also, birthdays and events are displayed more prominently on the home page.

When someone sends you a friend request, public stories about you may appear in their News Feed. If you decline a friend request from this person, public stories about you (stories that have the privacy set to "Everyone") will no longer appear in their News Feed. Please note that News Feed will never show stories that a non-friend wouldn’t ordinarily be able to see. For example, if you posted a video and set the privacy to "Friends," a person who is waiting for you to approve their friend request would not see that in their News Feed. If you had set the video to be visible to Everyone, that person would see it.

You can always change your privacy settings by selecting "Privacy Settings" under the Settings drop-down menu and clicking the appropriate section.

Here's how to choose your phone's tones, alerts, vibration etc: 1. On the main standby screen, press the white menu button.

2. Select "Settings".

3. Select "Personal".

4. Select "Profiles".

5. Double-click on the profile you normally use (this will usually be "General").

6. Select "Personalise".

7. Click on whatever you want to alter (for example "Ringing Tone" to change the call ringtone). Note that there are different ringtones for ordinary and video calls, and different settings for keypads and touchscreens.

8. When you've finished altering the settings, press the red button to go back to the main standby screen.

To switch to a different profile, tap the standby screen's date and choose the profile you want.

How to choose a ringtone from the music player You can also select a ringtone from the 5800's music player, just go to the track you want to use and select "Options". One of the options will be "Use Tone", giving you the choice of using it as the ringtone for the current profile, or as the tone for a specific person.

maybe u need to recostumize ur profile, There are several different ways to customize your Friendster profile:

First, you can add HTML to the "About Me" and "Who I Want To Meet" sections of your profile (go to your profile tab) and click "Edit Profile" to make your changes). Keep in mind that both the "About Me" and "Who I Want To Meet" sections are limited to 1000 characters, and that includes HTML tags, so make sure to leave yourself enough room to close all your tags (because un-closed tags can mess up the code of your page).

Second, you can add multimedia files to your profile, including movies, music, and photos. To do so, click your profile tab>go to "Edit Profile" and select the "Customize" tab. Go to the "Add music and video to your profile" field and drop in the appropriate (EMBED, OBJECT, or IMG SRC). Whatever you enter here will show up in the "Now Playing" section of your profile.

Finally, you can also edit the CSS code of your profile page. To do so, click your profile tab > go to "Edit Profile" and select the "Customize" tab. Enter your customized CSS code into the "Advanced users" field. Keep in mind that altering the CSS will default your profile skin to "No Skin/Custom CSS," so whatever modifications you make will apply to that color scheme. If you later choose a different skin from the "Beginners: Select a Friendster skin" section IT WILL CLEAR YOUR CSS CODE FROM THE ADVANCED USERS WINDOW to make way for the new skin.

Not happy with your changes? "Revert" (at the bottom of the page) will remove your chaanges and return your profile to the Friendster default look.

NOTE: if you don't see your customized profile after making your changes, go to your "Settings" page (top right of any page) and make sure your "SAFE MODE" setting is set to "NO". If you still don't see your custom profile and your safe mode setting is set to 'no' make sure your skin is set to: " No Skin/Custom CSS,.. If it is not, click the "No Skin/Custom CSS" skin button and then click Save. You should now see your customized profile.

usually this problem is caused by a faulty inverter circuit. transistors might been running too hot or a leaky capacitors also.not an easy task but try looking down for any defects on high voltage sections.

Try to Run this command

Start > Run > Outlook /cleanreminders