Error message: two copy to two copy

If the disk is copywrite protected, your recorder is designed to not record be it an rw or whatever disk. Try making the copy with your computer and use DVD Shrink software still available on line. This software will decode and shrink the data to fit your blank. Since the software cannot be updated (legal reasons), it might not work, and you will have to resort to DVD Fab for the decoding process. There should be no hassle with older disks.

problem with doc feeder or duplex unit causing problem

copy on my machine then i tray to copy

boot from the CD copy of your windows XP. enter in console session and manually replace the file. if the file is corrupted this should fix it

Try to reset the printer:

Unplug the printer from power

Hold the # and 9 together while plugging it back

If still not working try again with a # and 3 combination

Start the Konica Minolta Status application and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Q1- What make and model of copier are you using? Q2- Which document feeder are you using?

I have this same problem so I called Sharp.  This model is  a little older.  When you buy the disks there is a number with an X after it.  If you buy the - R disk the number has to be 4X or less,  for the -RW it has to 2X or less.  Apparently they can still be bought at Office Depot or online. 

Need some more information: -What exactly is the error message? -How long does it take from when you start the copy proces for the error to occur? -What program/procedure are you using to copy files to the CD-R? -What operating system are you using?

Try replacing the tab on the VCR tape-which may have been removed to prevent VCR eraure [?]