Hotpoint wm76p trips out the electric when the dorr closers if you dont close the door it turns on and asks you to colse the door but as soon as you close the door it trips the electric out straight away

This link has the part that is probably bad: Hotpoint Washing Machine Compatible Door Interlock - Part Number INT51 for bwd129 (ransomspares.co.uk)

check all the connections there could be a worn out wire

This video will show you how to open your Wmf540 hotpoint washing machine door that is stuck shut
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

http://www.espares.co.uk/part/washing-machines/doors/hotpoint/wm76p/p/1557/808/0/436765/187123/washer-dryer-door-glass-s.html

Hi goto the above page and you should find a video that should help you.
Please remember to rate me

First unplug your washer. Check the ground on the washer and make sure it isn't loose; this would be a good time to inspect the wiring harness for any problems. Next check the outlet (turn off the electric to that breaker first) make sure all the wires are tight and are making good contact; pay special attention to the neutral (white) wire. If that seems fine, and you are comfortable with going into you breaker panel, turn off that breaker and check the hot (the wire on the breaker) to make sure it isn't loose and then check the neutral wire. If either of these wires seem loose tighten them down....a loose wire will move when a load is put on it and cause the breaker to trip. If all seems normal and washer is still tripping the breaker you might want to replace the breaker.....they can go bad. Good luck!

Short circuit on the door switch module

FAULTY LOCK REPLACE

check the wiring and make sure nothing metal is on the motor because your dryer has a short in it somewhere

hi, hotpoint wt746 trips electric a few seconds after closing the door

try cleaning the mode swith that opereates the dorrs it sounds like its dirty