Canon PowerShot SD790 IS Digital Camera Logo

Related Topics:

Posted on Apr 18, 2010

CAMERA MESSAGE SD790 IS

CAMERA MESSAGE "CHANGE THE BATTERY PACK" MESSAGE IS APPEARING EVEN THOUGHT THE BATTERY IS FULLY CHARGE. i HAVE NEW BATTERIES AND A NEW BATTERY CHARGER, SO WE KNOW THE PROBLEM IS WITH THE CAMERA.

1 Answer

Emmanuel Afrifa

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 10 Answers
  • Posted on Apr 18, 2010
Emmanuel Afrifa
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Mar 01, 2008
Answers
10
Questions
2
Helped
3778
Points
27

Well, I haven't used a Canon PowerShot SD790 IS Digital Camera before, but I want to suggest this: before you start thinking of putting your camera apart, try to clean the battery terminals and the battery contacts of the camera with clean white paper, then reinsert the pack. Please be very careful when doing this so that you do not break or bend the contacts or terminals; they are usually delicate material.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have just replaced the battery pack in my Canon SX 200 is camera. The battery was bought from a camera dealer, therefore not counterfeit, but when I turn on the camera it asks me to replace the battery...

Mostt batteries have an issue of SHELF LIFE and so if the battery that was given to you was on SHELF for a long time then it can develop BACK EMF and so will not charge to the limit designed. So check the date on the pack and if this is more than 6 months ago , it is better to claim for a refund or replacement. If your camera did not have any other issue this is the only possibility.
The first charge also must be done for 8-15 hours.
Jul 16, 2011 • Cameras
1helpful
1answer

For christmas i was given a Bush HD pocket camcorder 9909, i've just put new batteries in but the camera shuts down because of low battery even though they're new batteries. It is rather...

You need to fully charge your battery pack. When you buy new rechargeable batteries it has low or none charge at all.

Thanks for using fixya!
0helpful
1answer

I have been having this problem with my Olympus mju1040 for quite sometime. Everytime i tried to charge the battery when the battery low signal is blinking or when the screen blackout, it will be fully...

Try charging it for an hour even if it is indicating that it is already full in 10 minutes. If the battery still gets drained after a few shots, then you should change your charger.
0helpful
1answer

IT KEEPS TELLING ME TO CHANGE THE BATTERIES (EVEN WHEN THEY'RE NEW BATTERIES) AND SHUTS DOWN COMPLETELY.

Couldn't find a firmware upgrade for my Canon PowerShot A720. Tried putting a piece of rubber under the spring on the lid to make it tighter and it helped because I can take more pictures before I get the dead battery message (even thought they aren't dead). I bought the Duracell that you can check the charge on because I'm sure I've wasted dozens of batteries by now.
0helpful
2answers

It won't turn on even with a fully charged battery. What do I do? I've owned it for at least 5 years and have three batteries and a pentax charger that turns green when a battery is charged. I put the...

yeah if you have had it for that long the batteries might be dead even if the appear to be charged i would get new batteries or get a new camera get one cheap on eBay ! have a good day :)
3helpful
3answers

I have a Canon SD1000 battery pack issue.

Hello,
I have a Canondigital ixusi which had the same problem and I purchased three new batteries, but found that all of them showed the "replace battery pack" message when fully charged. I have solved this problem by cleaning all the terminals on the batteries and in the camera very thoroughly with alcohol and Q-tips. Even though the terminals look completely clean, there must be a slight film which is preventing good contact. The contacts in the camera are spring loaded and I suspect they are not making a very good conection to the battery so any contamination is making a high resistance to the flow of electricity. Hope this helps - it worked for me.
22helpful
2answers

Change the batteries message even with new NIMH RShack batteries

The solution is to change the small 'date/time' battery. You can have the regular batteries as charged as you like, it won't make any difference. The tiny date/time battery is in the same compartment as the regular batteries, on the opposite side of the hinge. Extract it with a fingernail, it is situated on the left hand wall of the battery compartment (when the camera is inverted and the compartment open).
0helpful
3answers

CAMERA M425 HP PHOTOSMART

use AA duracell batteries with high amps.

that would help you
1helpful
1answer

Black Screen; Change Battery Message

simple! with my Canon S90 had the same problem until I changed the SD card from LEXAR for a TOSHIBA SD card and the message " Change the Battery Pack"disappeared.
Jun 27, 2008 • Cameras
0helpful
1answer

Battery Problem

I figured out the problem. My AA battery recharger was not making good contact, so although it said the batteries were recharged, this was not the case. After fixing this and getting full recharges, the problem went away.
Not finding what you are looking for?

740 views

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

old marine
old marine

Level 3 Expert

2426 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...