TrimLine was part of Nautilus until they were phased out Your problem sounds like the lower board is causing the problem. Not knowing where you are located it would be hard to direct you to a servicer near you , but ultimately you will need to call and see if you are comfortable in the way they handle you over the phone. If you are game to repair this the only tool you will need is a phillips screw driver. Unplug the unit pull off motor shroud and you will see a lower electronics board get a pencil and pad make a drawing of board ( stick man drawing good enough) and make notation of where all the connection go to check it twice before disconnecting and usually their are only 4 screws holding the board. Now you may purchase this board Treadmill Doctors.com just them M# and Ser# and they should be able to help you. Good Luck!!
Sounds like the same problem I have. Trouble appeared after I'd moved the treadmill. Local tech, tested the motor by touching red and black wires to the posts on a rechargeable drill and motor and belt moved fine...but no power coming off the board posts to the motor, even though everything else seems to be working...just no belt movement. He diagnosed a lower board issue. Trimline is no longer made but it was a $2000+ treadmill so may be worth saving. He pointed me to Fitnessrepairparts. com as the sole source of old, and rebuilt parts. I ordered a new board, which is really easy to install btw, but the treadmill acted exactly the same way. All lights, menus, clicks, sounds, etc seem to work, but belt wont move. Tried the drill battery test again and the belt moves fine. Just not sure what to think, but the replacement board was $350...and didn't help me a bit. Still working on it.
did you ever figure this out...I also bought the replacement board and didn't help. I would love to know how to fix this.
commenting on the above it seems i a faced with the same problem when we moved the treadmill it seems that there is no belt movement at all does sometimes come up with an e1 error .. would like to get to the bottom of this and get it fixed once and for all .. post back please
×
986 views
Usually answered in minutes!
×