How do i set military time - JCPenney Armitron Sport Link Bracelet Watch

There are 48 hour settings possible 12AM hours 12 PM hours and 24 non designated (military time). Keep cycling through until the correct hour comes around. Make sure it says either AM or PM if you do not want military time.

You can change to military / 24 hour clock in your profile settings at: https://www.fitbit.com/user/profile/edit

press the mode and set from 24 back to 12 save setting by pressing mode again

Go to your events/calendar. Click the little settings symbol there. Then uncheck 24-hour time and save. How do I change my clock settings from military time to regular time.

just found this on the internet dont no if this will help you out if not let me no.

This baffled me for a bit...Finally I just took the batteries out, then put them right back in and it was no longer on military time.

Actually all the hours are military time. They are the same for the first twelve hours of the day. If you go through the setting procedure it will ask you if you want "12" or "24" hour time. Select 12. "24" is military

military time:
1. When setting the time on your watch, IF you watch can change to Military time(and most can)
2. when you are adjusting the hours go through a full 24 hour cycle. You'll notice that the 2nd time through it is on military time.. 3rd time through back to 12 hour day AM/PM cycle .. 4th time back to Military.
So you can do this as many times as it takes to get to the right time ..
In 24 hour time you will see an "H" displayed where you normally see and "A" for AM and "P" for pm.

If your set up is: Top-Left=Indiglo Top-Right=St./Stop Bottom-Left=Mode Bottom-Right=Lap/Reset

Than follow these steps:
1. Press Lap/Reset and hold. You should see the time the alarm was set for.
2. While holding Lap/Reset, press Mode.
3. Let go of all buttons.
4. There you go!

Hope that was a help

I have a G Shock DW-004 made in 1997. I had this same problem, and I tried everything to change TO military time and back to standard time. I just read the bit to try and was about to do it. I pressed the top left button to get the time to flash, and hit the light button by accident (the one with the big G on it) and VIOLA! It changed to military time. So in my model, anyway, the G light button (under the display on the edge of the watch body) changed the time to military from standard and back again, when the time is flashing.

Good luck!