No wi-fi signal transmitted

What is giving you the 8 digit pin is it coming from the wireless router or wireless network provider ?

on your phone
To turn Wi-Fi on and connect to a wireless network
•
Drag down notification panel and touch
to access
Settings
.
•
Touch the switch
beside Wi-Fi to turn on/off Wi-Fi.
•
Touch
Wi-Fi
, the detailed information of detected Wi-Fi networks is displayed in the Wi-Fi
networks section.
•
Touch a Wi-Fi network to connect. If the network you selected is secured, you are required to enter
a password or other credentials (you may contact your network operator for details). When finished,
touch
Connect

Things That Affect Wireless Router Signals

1. Many wireless routers are using the same wireless channel. Many manufacturers choose channel 6 as the default. Change to another channel.
2. Analogue video senders used to send audio and video to other TVs in the home.
3. Microwave ovens emit interference in the 2.4GHz band.
4. Wireless speakers and console controllers can cause interference with the wireless router.
5. Bluetooth devices, newer Bluetooth devices can jump to different frequencies if there is a connection problem.
6. Power cables located near the wireless router can cause dropouts and speed reduction.
7. Fish tanks and mirrors will cause massive Wi-Fi shadow on the other side of the tank from the wireless router.
8. Depending upon the location of large mirrors will reflect wireless signal away your computer.
9. Building materials will block wireless signals such as plasterboards with metal foil, reinforced concrete walls and floors. Also objects near the wireless router such as metal filing cabinets and other electrical appliances.
10. Blinking Christmas lights can reduce Wi-Fi performance by 25% when it is close to the wireless router.

Things That Affect Wireless Router Signals
1. Many wireless routers are using the same wireless channel. Many manufacturers choose channel 6 as the default. Change to another channel. 2. Analogue video senders used to send audio and video to other TVs in the home. 3. Microwave ovens emit interference in the 2.4GHz band. 4. Wireless speakers and console controllers can cause interference with the wireless router. 5. Bluetooth devices, newer Bluetooth devices can jump to different frequencies if there is a connection problem. 6. Power cables located near the wireless router can cause dropouts and speed reduction. 7. Fish tanks will cause massive Wi-Fi shadow on the other side of the tank from the wireless router. 8. Depending upon the location of large mirrors will reflect wireless signal away your computer. 9. Building materials will block wireless signals such as plasterboards with metal foil, reinforced concrete walls and floors. Also objects near the wireless router such as metal filing cabinets and other electrical appliances. 10. Blinking Christmas lights can reduce Wi-Fi performance by 25% when it is close to the wireless router.

Are you using a laptop? If not, the computer that you are using should capable of connecting via wireless connection. And the Modem /router should be transmitting wireless signal. If you can successfully connect via wifi, then all of your wireless end devices should be connected via wi fi a as well. check your local network for issue isolation.

(1)Make sure that your AP router WiFi device is configured properly and the LEDs showing the signals with light are on.

(2)Try to bring other laptops in the range it will tell you if the signals are being emitted and are being caught by other laptops.

(3)If all of the above are true than this might be your problem that you have to turn the Wifi button on on your laptop.If you take a look at your keyboard you will find that there are some extra buttons on top you have to figure out the one that turns on the Wifi receiver.

Good Luck!

Please tell what is your Wi-Fi LED status. what channel count you configured inside the configuration of router. Please be sure that your wi-fi signal is transmitting or the device is able to receive the wi-fi signal.And please tell what router you using as host and what device you using as receiver. Thanks for subscribing Fixya... All the best

Make sure on laptop wi fi switch is turn on.
Uninstall wi fi network adapter driver then reinstall.
Right click on my network places and click on property then right click on wi fi adapter and enable it and click on view available wi fi networks .
If you still not detect signal of router then You hav to reset router.
For thjat press RESET button for 10 seconds it is in back panel of router.Then it defaults.
then connect router to computer with ethernet cable then you can access it with below link.
http://192.168.1.1
or
http://192.168.0.1
type user as "admin" and password as "admin" or blank or "password"
Then you can see configuration page.
Then set WAN settings as your isp.
GO to wireless settings and enable it .
If you want to secure enable WEP security and add wep code.
Enable DHCP.
Then save and restart router then check.
Let me know if you need further assistance.
Thanks.

right nest to the power button is the wifi antenna button insure that it is green indicating that it is turned on

by default, dell systems' switch for wireless can be done by pressing Fn and tap F2. The wifi light should lit up. Your modem is integrated to the motherboard. If you were able to lit up the wifi light, this should be able to detect wireless signals for you to connect to.

Yes you can, you just have to connect to the network wherever you are and provide the password for that location if it has security.