At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
no it's gonna be two inches longer . you might be able to change chain and bar between saws ? i never done that might work , but would be down on power with larger bar 4 sure , but still would cut wood , just dont enter it in any races
sae 30 will be ok in the oil tank to lubricate the chain, most manufacturers will recommend bio oil as we live in a green age, mineral chain oil has a non fling addative so as the oil lubricates the bottom of the bar where most cutting is done and not just fly off the end of the bar.
Has the chain and bar been removed-- if so, make sure the teeth are cutting toward you on the bottom run of chain. Also, make sure the chain is properly sharpened. Hope this helps!
I tried a Google search for "Bosch ake 40-19 S chain" and found many on-line outlets. If you take your chain (they need it to use as a pattern) to a local saw shop or a good hardware they can probably fabricate one in a few minutes and you will save the shipping and handling costs.
×