WHAT IS DIRECT TV CODE FOR SYLVANIA LC370SS9 - Sylvania LC370SS9 LCD TV

The set has failed to come from standby to on fully---could be the power board but if it will not power off usually it is elsewhere.

Time to have a qualified shop take a look a get a estimate.

If you have a wall mount kit, it is fairly simple. You just find the place that you want the tv to go and find a nearby stud to install the mount. After that you will want a second person to help with either holding the tv up or screwing in the tv to the mount. There are four screw holes in the back of the tv to screw through the wall mount plate into the back of the tv. Check to make sure it is stable, then you have successfully installed the tv to your wall

Look here: http://www.comcast.com/corporate/customers/customer_support/remotes.html

hi! i have here a couple of codes for your tv! just try them, 1004, 1007, 1018, 1027, 1047, 1056, 1057, 1059, 1060, 1061, 1103, 1124, 1145, 1150, 1153, 1279, 1296, 1387, 1464, 1483,1046, 1465, 1150, 2092, 1464, 2408, 1465, 2260, 1027, 2064, 3105, 1124, 2078, 3088, 1296, 2213, 3147, 1145, 3095, hope this helps!!!! goodluck!!!!

try the codes  516, 738,  one of them wud work for sure!
Hope this helps! 

hi! i have here a couple of codes for your tv! just try them 1004, 1007, 1018, 1027, 1047, 1056, 1057, 1059, 1060, 1061, 1103, 1124, 1145, 1150, 1153, 1279, 1296, 1387, 1464, 1483,1046, 1465,1150, 2092, 1464, 2408, 1465, 2260, 1027, 2064, 3105, 1124, 2078, 3088, 1296, 2213, 3147, 1145, 3095, hope this helps!!! goodluck!!!

I have the same issue. I've tried every version of Comcast box there is available. Nothing. Next I'm trying taping off the Sylvania IR and running the volume through an old receiver I have. That is, of course, that there isn't a solution posted here first. Will report back later.

Is this the style of Moxi remote that you have?
If so try these steps to find your TV
1. Turn on the power to your TV.
2. Press and hold down the MOXI and OK buttons.at the same time until the LED at the top blinks twice.
3. Press the numbers 9910 on the remote and the led should blink twice again.
4. Press the mute button. If the TV mutes then press OK to lock in the code. If the TV does not mute press the up arrow once then press mute and continue to press the up arrow once then press mute until the TV mutes once the TV mutes press the OK button to lock in the code.
*** Note this may take a couple minutes of trying to cycle through the code list to find which one will work with your TV *****

Good Luck...

you have to turn off the power save setting

Here's the manual =>

http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/rca/rcr450-manual.zip&area=other

Sylvania TV codes are 1004, 1006, 1008, 1019, 1062, 1068, 1069, 1075, 1076, 1088, 1130, 1132, 1134, 1183, 1189, 1251 listed in back of the manual.