Technics sc-dv250 hi i have a technics sc-dv250 system it keeps coming up error on my cd player it wont let me play cds or dvds please help kylie

The answer is simple if you want to listen to mp3 on your system and you purchased dv290 dvd changer you also need dv290 sound processor as they were coded - for example you have dv250 system with dv250 chager and sound processor you are only going to be able to see dvds and cds if you swap your changer to dv290 (plays mp3, audio ,wma and dvds) you also need to purchase dv290 sound processor as well - no need to change your amplifier or tape deck (the ribbon on the tape deck will be compatibile)
the lower end units were incompatibile with higher spec changers same when it comes to EH series if you have eh780 sound processor you are only going to be able to plug 780 changer or lower 760 770 etc... but 790 will not work with it unless you get 790 sound proc

Is that what you are finding?

The laser may just be dirty so you might try to use a good laser lens cleaner and see if that works.

check on ebay

mine does the same.the display flashes "prog" and --:-- on cd's,dvd's and even the cleaning disk it almost sounds like it isn't getting enough power to spin the disk.

i have a technics hi fi sc-dv290 when i put a cd in it comes up h2o no play do you know what this means thanks

u need a new motor in yr dvd player i had same problem so had new motor fitted cost 50 pound works now

you need a new motor in yr dvd player i had same problem had new motor works now

hi bobro, when burning the cds, make sure that you are burning it as an audio cd, as this player does not support mp3 formats, just normal audio cds... hope this helps!

keep an eye out on ebay.