Self timer please help me to set the self timer HOW TO SET SELF TIMER?

Press the self-timer button to cycle through self-timer settings. The rectangle indicates normal shooting, the clock indicates self-timer. Depending on the shooting mode, you may also see overlapped rectangles for continuous shooting.

To change the delay time, select [Self-timer] from the Recording menu.

The self-timer button is the same as the down-arrow on the circular multi-selector, marked with a clock.

the self timer usually works like this.
find the self timer setting and set it to 5 or 10 seconds.
then exit the menu and click the button that you normally press to take photo. the self timer will start automatically and the picture will be taken after 5 or 10 seconds (depending on what you set).
note that the self timer will be reset to off after this.

Hi,

If you press the left < button on the camera before you take a picture you will have the option to set the self-timer. The options that you can choose are: 1. Single shot; 2. Continuous shot; 3. Self-timer (10 sec) / Remote control; 4. Self-timer (2 sec); 5. Self-timer (10 sec): Continuous (2 - 10 shots).

Hope this helps!
Please rate!!
Cheers

Press the self-timer button and use arrow buttons to select the delay time, press MENU to confirm. More detail please read the user’s manual on page 68.
Here is the link of the manual http://gdlp01.c-wss.com/gds/0300001224/PSSX110IS_CUG_EN.pdf

Self timer is not available in AUTO mode.
Please check the other options ( As I do not remember the other right now)
Select the other options available (eg: Tv,Av etc) and hit function key and scroll down.
In the self timer it self you can also mention how many shots you want to take.
Also you can see teh manual. In the last pages it is being under teh section Self timer.

To turn on go to MENU / Drive mode / Self-timer.
To set delay time go to MENU / Setup / Screen 4 / Self-timer. Can set to either 2 or 10 seconds.

Turn on the camera, click menu button. The first option is a little clock picture on the left, and on the right top corner of the screen it should say "self timer". Click the little button on the dial with your thumb and a menu comes up "self timer ON, OFF". Move up, click "ON" and it is set for your next photo to self shoot. You have to do this for each photo.

1. Secure the camera to a tripod or place it on a stable surface.
2. Rotate the mode dial to [S], [P], [PICT], [AV], or [M]
3. Press the Power button turn on the Camera.
4. Press arrow [>] .
5. Use up arrow or down arrow to select the desired self-timer mode.
6. Compose your scene and press the shutter button.

• The self-timer function is activated.
• The photograph is then taken after the preset time.
• To cancel the self-timer at any time, press the shutter button.

After one shot is taken, the self-timer mode is turned off.
If you wish to take another image using the self-timer, repeat these steps.

Once you have the self-timer set up, press the shutter release button to activate it.

Hi there,
by the way in setting the timer for your camera here is what you are going to do...

-turn the camera on
-set the camera in recording
-press the Right Button beside the menu button (the incomplete circle)
-and then you will see that there will an icon showing in the left side part of the screen of the camera.

Selecting the self-timer
1. Rotate the MODE DIAL to select a RECORDING mode with the exception of VOICE RECORDING mode.
2. Press the SELF-TIMER button until the desired mode indicator displays on the LCD monitor.
A 10 second, 2 second or double self-timer icon appears on the LCD monitor. In Movie Clip mode, only the 10-second self-timer will work.
•2SEC self-timer (icon of incomplete circle with 2S)
: Pressing the shutter button will allow an interval of 2 seconds before the image is
taken.
•10SEC self-timer (incomplete circle)
: Pressing the shutter button will allow an interval of 10 seconds before the image is taken.
•Double self-timer (double incomplete circle)
: A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken. When using the flash, the 2-second self-timer may be delayed for longer than 2 seconds depending on the flash charge time.
3. When you press the SHUTTER button, the picture will be taken after the
specified time has elapsed.