Required help for solving Error E007 of Canon iR2116J

That error iddicate that the fixing film is worn out, and need to be replaced

E007-0000 Description Fixing film sensor failure
The fixing film sensor is faulty. Remedy - Check the connector of the fixing film sensor. - Replace the fixing film sensor. - Replace the DC controller PCB.

The fusing unit needs to be replaced or repaired. Contact your dealer or service person

this is related to the teflon(fixing film) in the fuser unit. u have to replace it to get machine working . so better call a tech and get it replaced .u have to do so to make it working ,no other option.i can't explain u how to do so as it is trick and u might damage other parts and sensor's

Hello,
the error E007 means - fixing film rotation error.
If you are not a tech you must call for one. He could replace the broken part for about 2-300$.

E007 - Fixing film rotation error

You have to disassemble fuser unit and inspect a fixing film, if damaged - replace.

The official documentation says:
E007 0000 Fixing film sensor failure
The fixing film sensor is faulty. - Check the connector of the fixing film
sensor.
- Replace the fixing film sensor.
- Replace the DC controller PCB.

Hi,
wich is the error code that machine shows? i.e. E00002-000
You said that machine says turn off and on, these happens when the error code is present.
And by the way do you mean IR2016J, 2116 do not exsist!

conon IR2116J printer E001 and E808.Please help me.

The erreor code E007 has to do with the fixing ***'y upper film ***'y or roller. It is saying that the film is not moving in and out of "HP" Most of the time it means that the fusing film is torn and not moving properly. If you are getting paper jams in the fusing area and or unfixed or smeared copies. You most likly need to have the fusing film ***'y replaced. It could also be that it is out of place and needs to be readjusted. The only problem is that it's a little tricky to get to and not a bad idea to have a new film to replace the old one while you have it out. Good Luck

hi how do solve this problem system error E007