Develop ineo 161

1. Press the Utility key.
2. Press the following keys in this order.
3. Stop ? 0 ? 0 ? Stop ? 0 ? 1
4. The Service mode menu screen will appear.

http://farbtoner.com/develop-ineo-c-200.html?language=en

replace the developer and drum.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

replace the drum and developer

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

hi, developer ineo 161 show thes malfuncion

You must press Utylity/Counter next open on screen admin setting. (Pass is 12345678) next network setting, IP setting and you can set IP address. If network (card, cable, switch or router) are OK you can print on your Develop. Driver you find on www.develop.de or http://www.konicaminolta.eu/en/business-solutions/support/download-center.html

need software driver for Ineo Develop 161 photocopier
for windows 7 & 8

C0F32: Faulty ATDC Sensor

Gently swing the IU in the horizontal

direction to even out developer
in the Developer Mixing Chamber.

Clean ATDC Sensor (UN1).

Change ATDC Sensor (UN1) and
developer.

Change Master Board (copier:
PWB-A).

develop ineo 250 machine error comes c3452
how i solve this

1 Press the [Utility] key three times.
“USER MANAGEMENT” appears.
2 Press the [Yes] key.
"CHANGE D/C" appears
3 Press the [Yes] key.

Your done.